Thu Jan 20 01:29:43 UTC 2022 I: starting to build libbest-perl/bullseye/amd64 on jenkins on '2022-01-20 01:29' Thu Jan 20 01:29:43 UTC 2022 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_26/92959/console.log Thu Jan 20 01:29:43 UTC 2022 I: Downloading source for bullseye/libbest-perl=0.15-2 --2022-01-20 01:29:44-- http://cdn-fastly.deb.debian.org/debian/pool/main/libb/libbest-perl/libbest-perl_0.15-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2066 (2.0K) Saving to: ‘libbest-perl_0.15-2.dsc’ 0K .. 100% 178M=0s 2022-01-20 01:29:44 (178 MB/s) - ‘libbest-perl_0.15-2.dsc’ saved [2066/2066] Thu Jan 20 01:29:44 UTC 2022 I: libbest-perl_0.15-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libbest-perl Binary: libbest-perl Architecture: all Version: 0.15-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Best Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libbest-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libbest-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 10) Build-Depends-Indep: libtest-exception-perl, libtest-pod-perl, perl Package-List: libbest-perl deb perl optional arch=all Checksums-Sha1: 7581a36dce458dd1f9bf72e3e854cf7b845dcec1 39268 libbest-perl_0.15.orig.tar.gz 764fbf84722cc5abf87756b1c55e21315d8286b6 2824 libbest-perl_0.15-2.debian.tar.xz Checksums-Sha256: 8fc1b5a354bb9d6ac925d170a6fe4fcb48794c05f395973dd5bb07ed6ac5403d 39268 libbest-perl_0.15.orig.tar.gz 4bd1d4920ebcbba3e5b4e5e45efd1d9924f8a3e446070539612326cb9f6ecb3d 2824 libbest-perl_0.15-2.debian.tar.xz Files: 40cecbb72869ab13b37426f0da68243b 39268 libbest-perl_0.15.orig.tar.gz 8c2316a5e5272b70017dcecfbff7eabf 2824 libbest-perl_0.15-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEdqKOQsmBHZHoj7peLsD/s7cwGx8FAlq9+6YACgkQLsD/s7cw Gx9nJA/+LqSagc3wdE91zYFAGYfWi2Gx0DmlZ8LP6BhVGsrz1Ixtyq/gBySz+Bx2 J/LtwFxPisoIFWLWkBlMWzhq6IY56oxWoG5VOOt8J41/6VZe4fIECDg7/OsA3uRH dJT/7MSSKeP1HiVZCa2c2Z6c9CqNVFdFvut+dWF46fv1apviAU0REw+wDj5PhsOq 811Ud9eQK6npXyErif6PZM7KdjI6pO/8eStqdEz79CNfgg2dZKvCltXGVH0riIvP R6BFgNAEdTvqirN7koAUR2GgSv9hV2sn/042Ikh+nge8NUd1jV889MBBeMSYBt9W lYM1mdHFT1SOlaHdJca/vhJWu++I1Oc8od4qBownlQiGfvLLEXFFG/MlicS7p19X 5CS9mxlpsaX/NTUMjyx17OSprFzdCN8uVHXQlXVSGILQTcgOKMr0dJXbLCeyTQq5 FxDk7v+KFyLYSQ7vaja6diTUeZCiTgjErQPlhnirRCv/xOMNU604tNdYdu+H223Z KGHVqt8xh49Yc8Ji7Jp5ckdOVAUEmILtHo7KUf5ZUYxZtQNTpqalsXmDIRePLZIC XfIJqESY6cpchC5JBfTpLmVmLLeoiwL3vYRaYwKmLk62muy9iCZDBaWlxycAO6+X PTPvnYokSODQnMjcqC1BBizEQZH9gcrKbRw99Av1RknWaTU7iiM= =VUyu -----END PGP SIGNATURE----- Thu Jan 20 01:29:44 UTC 2022 I: Checking whether the package is not for us Thu Jan 20 01:29:44 UTC 2022 I: Starting 1st build on remote node ionos5-amd64.debian.net. Thu Jan 20 01:29:44 UTC 2022 I: Preparing to do remote build '1' on ionos5-amd64.debian.net. Thu Jan 20 01:30:31 UTC 2022 I: Deleting $TMPDIR on ionos5-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Feb 21 19:52:48 -12 2023 I: pbuilder-time-stamp: 1677052368 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libbest-perl_0.15-2.dsc] I: copying [./libbest-perl_0.15.orig.tar.gz] I: copying [./libbest-perl_0.15-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.RHZUNaM8/trustedkeys.kbx': General error gpgv: Signature made Thu Mar 29 20:56:06 2018 -12 gpgv: using RSA key 76A28E42C9811D91E88FBA5E2EC0FFB3B7301B1F gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libbest-perl_0.15-2.dsc dpkg-source: info: extracting libbest-perl in libbest-perl-0.15 dpkg-source: info: unpacking libbest-perl_0.15.orig.tar.gz dpkg-source: info: unpacking libbest-perl_0.15-2.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3181994/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=16' DISTRIBUTION='' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='23cfdf8e895c4b1e9fc707999bfb52de' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3181994' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/pbuilderrc_Fnib --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/b1 --logfile b1/build.log libbest-perl_0.15-2.dsc' SUDO_GID='110' SUDO_UID='105' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux ionos5-amd64 5.14.0-0.bpo.2-amd64 #1 SMP Debian 5.14.9-2~bpo11+1 (2021-10-10) x86_64 GNU/Linux I: ls -l /bin total 5476 -rwxr-xr-x 1 root root 1234376 Aug 4 2021 bash -rwxr-xr-x 3 root root 38984 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38984 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38984 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 18424 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 43936 Sep 23 2020 cat -rwxr-xr-x 1 root root 72672 Sep 23 2020 chgrp -rwxr-xr-x 1 root root 64448 Sep 23 2020 chmod -rwxr-xr-x 1 root root 72672 Sep 23 2020 chown -rwxr-xr-x 1 root root 151168 Sep 23 2020 cp -rwxr-xr-x 1 root root 125560 Dec 10 2020 dash -rwxr-xr-x 1 root root 113664 Sep 23 2020 date -rwxr-xr-x 1 root root 80968 Sep 23 2020 dd -rwxr-xr-x 1 root root 93936 Sep 23 2020 df -rwxr-xr-x 1 root root 147176 Sep 23 2020 dir -rwxr-xr-x 1 root root 84440 Jul 28 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 39712 Sep 23 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 39680 Sep 23 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 69032 Jul 28 2021 findmnt -rwsr-xr-x 1 root root 34896 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 203072 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 98048 Mar 2 2021 gzip -rwxr-xr-x 1 root root 22600 Nov 6 2019 hostname -rwxr-xr-x 1 root root 72840 Sep 23 2020 ln -rwxr-xr-x 1 root root 56952 Feb 7 2020 login -rwxr-xr-x 1 root root 147176 Sep 23 2020 ls -rwxr-xr-x 1 root root 149736 Jul 28 2021 lsblk -rwxr-xr-x 1 root root 85184 Sep 23 2020 mkdir -rwxr-xr-x 1 root root 76896 Sep 23 2020 mknod -rwxr-xr-x 1 root root 48064 Sep 23 2020 mktemp -rwxr-xr-x 1 root root 59632 Jul 28 2021 more -rwsr-xr-x 1 root root 55528 Jul 28 2021 mount -rwxr-xr-x 1 root root 18664 Jul 28 2021 mountpoint -rwxr-xr-x 1 root root 147080 Sep 23 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 43872 Sep 23 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 2021 rbash -> bash -rwxr-xr-x 1 root root 52032 Sep 23 2020 readlink -rwxr-xr-x 1 root root 72704 Sep 23 2020 rm -rwxr-xr-x 1 root root 52032 Sep 23 2020 rmdir -rwxr-xr-x 1 root root 27472 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 122224 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Feb 9 03:46 sh -> dash -rwxr-xr-x 1 root root 43808 Sep 23 2020 sleep -rwxr-xr-x 1 root root 84928 Sep 23 2020 stty -rwsr-xr-x 1 root root 71912 Jul 28 2021 su -rwxr-xr-x 1 root root 39744 Sep 23 2020 sync -rwxr-xr-x 1 root root 531928 Feb 16 2021 tar -rwxr-xr-x 1 root root 14456 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 101408 Sep 23 2020 touch -rwxr-xr-x 1 root root 39680 Sep 23 2020 true -rwxr-xr-x 1 root root 14328 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 35040 Jul 28 2021 umount -rwxr-xr-x 1 root root 39744 Sep 23 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 147176 Sep 23 2020 vdir -rwxr-xr-x 1 root root 63744 Jul 28 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/3181994/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), libtest-exception-perl, libtest-pod-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19655 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libsub-uplevel-perl{a} libtest-exception-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 18.4 MB of archives. After unpacking 67.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main amd64 bsdextrautils amd64 2.36.1-8 [145 kB] Get: 2 http://deb.debian.org/debian bullseye/main amd64 libuchardet0 amd64 0.0.7-1 [67.8 kB] Get: 3 http://deb.debian.org/debian bullseye/main amd64 groff-base amd64 1.22.4-6 [936 kB] Get: 4 http://deb.debian.org/debian bullseye/main amd64 libpipeline1 amd64 1.5.3-1 [34.3 kB] Get: 5 http://deb.debian.org/debian bullseye/main amd64 man-db amd64 2.9.4-2 [1354 kB] Get: 6 http://deb.debian.org/debian bullseye/main amd64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main amd64 libmagic-mgc amd64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main amd64 libmagic1 amd64 1:5.39-3 [126 kB] Get: 9 http://deb.debian.org/debian bullseye/main amd64 file amd64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main amd64 gettext-base amd64 0.21-4 [175 kB] Get: 11 http://deb.debian.org/debian bullseye/main amd64 libsigsegv2 amd64 2.13-1 [34.8 kB] Get: 12 http://deb.debian.org/debian bullseye/main amd64 m4 amd64 1.4.18-5 [204 kB] Get: 13 http://deb.debian.org/debian bullseye/main amd64 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main amd64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main amd64 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main amd64 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main amd64 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main amd64 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main amd64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main amd64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main amd64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main amd64 libelf1 amd64 0.183-1 [165 kB] Get: 25 http://deb.debian.org/debian bullseye/main amd64 dwz amd64 0.13+20210201-1 [175 kB] Get: 26 http://deb.debian.org/debian bullseye/main amd64 libicu67 amd64 67.1-7 [8622 kB] Get: 27 http://deb.debian.org/debian bullseye/main amd64 libxml2 amd64 2.9.10+dfsg-6.7 [693 kB] Get: 28 http://deb.debian.org/debian bullseye/main amd64 gettext amd64 0.21-4 [1311 kB] Get: 29 http://deb.debian.org/debian bullseye/main amd64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main amd64 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main amd64 libsub-uplevel-perl all 0.2800-1.1 [16.5 kB] Get: 33 http://deb.debian.org/debian bullseye/main amd64 libtest-exception-perl all 0.43-1 [18.7 kB] Get: 34 http://deb.debian.org/debian bullseye/main amd64 libtest-pod-perl all 1.52-1 [14.2 kB] Fetched 18.4 MB in 0s (61.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19655 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_amd64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../01-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_amd64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../03-libpipeline1_1.5.3-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_amd64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_amd64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_amd64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_amd64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../10-libsigsegv2_2.13-1_amd64.deb ... Unpacking libsigsegv2:amd64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_amd64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../23-libelf1_0.183-1_amd64.deb ... Unpacking libelf1:amd64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_amd64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:amd64. Preparing to unpack .../25-libicu67_67.1-7_amd64.deb ... Unpacking libicu67:amd64 (67.1-7) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_amd64.deb ... Unpacking libxml2:amd64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_amd64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../31-libsub-uplevel-perl_0.2800-1.1_all.deb ... Unpacking libsub-uplevel-perl (0.2800-1.1) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../32-libtest-exception-perl_0.43-1_all.deb ... Unpacking libtest-exception-perl (0.43-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Setting up libpipeline1:amd64 (1.5.3-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:amd64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libtest-pod-perl (1.52-1) ... Setting up libmagic1:amd64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libsigsegv2:amd64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libsub-uplevel-perl (0.2800-1.1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libelf1:amd64 (0.183-1) ... Setting up libxml2:amd64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libtest-exception-perl (0.43-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13+deb11u2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libbest-perl-0.15/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libbest-perl_0.15-2_source.changes dpkg-buildpackage: info: source package libbest-perl dpkg-buildpackage: info: source version 0.15-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niko Tyni dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libbest-perl-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libbest-perl-0.15=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Writing test t/50-basic.t Writing test t/51-basic-a.t Writing test t/52-best.t Writing test t/53-onearg.t Writing test t/54-args-a.t Writing test t/55-noargs.t Writing test t/56-ver.t Writing test t/57-exist-a.t Writing test t/58-exist.t Writing test t/59-code.t Writing test t/60-hash.t Writing test t/61-hash-a.t Writing test t/62-hash-aa.t Writing test t/63-ver-h.t Writing test t/64-ok-h.t Writing test t/65-if-h.t Writing test t/66-args-h.t Writing test t/67-code-h.t *** Module::AutoInstall version 1.06 *** Checking for Perl dependencies... [Core Features] - Test::More ...loaded. (1.302175) - Test::Exception ...loaded. (0.43) *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Best Writing MYMETA.yml and MYMETA.json dh_auto_build make -j16 make[1]: Entering directory '/build/libbest-perl-0.15' cp lib/Best.pm blib/lib/Best.pm "/usr/bin/perl" "-Iinc" "-Iblib/arch" "-Iinc" "-Iblib/lib" Tests.PL Tests Writing test t/50-basic.t Writing test t/51-basic-a.t Writing test t/52-best.t Writing test t/53-onearg.t Writing test t/54-args-a.t Writing test t/55-noargs.t Writing test t/56-ver.t Writing test t/57-exist-a.t Writing test t/58-exist.t Writing test t/59-code.t Writing test t/60-hash.t Writing test t/61-hash-a.t Writing test t/62-hash-aa.t Writing test t/63-ver-h.t Writing test t/64-ok-h.t Writing test t/65-if-h.t Writing test t/66-args-h.t Writing test t/67-code-h.t Manifying 1 pod document make[1]: Leaving directory '/build/libbest-perl-0.15' dh_auto_test make -j16 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libbest-perl-0.15' "/usr/bin/perl" "-Iinc" "-Iblib/arch" "-Iinc" "-Iblib/lib" Tests.PL Tests Writing test t/50-basic.t Writing test t/51-basic-a.t Writing test t/52-best.t Writing test t/53-onearg.t Writing test t/54-args-a.t Writing test t/55-noargs.t Writing test t/56-ver.t Writing test t/57-exist-a.t Writing test t/58-exist.t Writing test t/59-code.t Writing test t/60-hash.t Writing test t/61-hash-a.t Writing test t/62-hash-aa.t Writing test t/63-ver-h.t Writing test t/64-ok-h.t Writing test t/65-if-h.t Writing test t/66-args-h.t Writing test t/67-code-h.t PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01utility.t t/50-basic.t t/51-basic-a.t t/52-best.t t/53-onearg.t t/54-args-a.t t/55-noargs.t t/56-ver.t t/57-exist-a.t t/58-exist.t t/59-code.t t/60-hash.t t/61-hash-a.t t/62-hash-aa.t t/63-ver-h.t t/64-ok-h.t t/65-if-h.t t/66-args-h.t t/67-code-h.t t/boilerplate.t t/pod-coverage.t t/pod.t # Testing Best 0.15, Perl 5.032001, /usr/bin/perl t/00-load.t ....... 1..1 ok 1 - use Best; ok t/01utility.t ..... 1..26 ok 1 - ARRAY(0x55d234e47910) does array ok 2 - main=ARRAY(0x55d234e47538) does array ok 3 - Overloaded=HASH(0x55d234e477d8) does array ok 4 - HASH(0x55d234e474d8) doesn't do array ok 5 - CODE(0x55d234e70a70) doesn't do array ok 6 - String doesn't do array ok 7 - 1.00 doesn't do array ok 8 - HASH(0x55d234e47910) does hash ok 9 - main=HASH(0x55d2355aae68) does hash ok 10 - Overloaded=ARRAY(0x55d234e47538) does hash ok 11 - ARRAY(0x55d234e474d8) doesn't do hash ok 12 - CODE(0x55d23552cd60) doesn't do hash ok 13 - String doesn't do hash ok 14 - 1.00 doesn't do hash ok 15 - CODE(0x55d2354e88e0) does code ok 16 - main=CODE(0x55d2354baf18) does code ok 17 - Overloaded=ARRAY(0x55d234e476d0) does code ok 18 - 1 looks like version ok 19 - 1 looks like version ok 20 - 1.00_01 looks like version ok 21 - v6 looks like version ok 22 - A::Module doesn't look like version ok 23 - AnAlternative doesn't look like version ok 24 - LastChance doesn't look like version ok 25 - Version::Ok doesn't look like version ok 26 - Version::TooLow doesn't look like version ok t/50-basic.t ...... 1..5 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - loaded correct one - trace evidence ok 4 - loaded correct one - which() ok 5 - loaded correct one - which() from other module ok t/51-basic-a.t .... 1..3 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - loaded correct one - trace evidence ok t/52-best.t ....... 1..4 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - loaded correct one ok 4 - ->import ok t/53-onearg.t ..... 1..4 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - loaded correct one ok 4 - ->import ok t/54-args-a.t ..... 1..4 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - loaded correct one ok 4 - ->import ok t/55-noargs.t ..... 1..4 ok 1 - Best didn't crash ok 2 - tried all modules ok 3 - ->import wasn't called ok 4 - ->import ok t/56-ver.t ........ 1..4 ok 1 - Best didn't crash ok 2 - attempted ok 3 - loaded ok 4 - args ok t/57-exist-a.t .... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/58-exist.t ...... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/59-code.t ....... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/60-hash.t ....... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/61-hash-a.t ..... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/62-hash-aa.t .... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/63-ver-h.t ...... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/64-ok-h.t ....... 1..4 ok 1 - Best didn't crash ok 2 - attempted ok 3 - loaded ok 4 - args ok t/65-if-h.t ....... 1..3 ok 1 - Best didn't crash ok 2 ok 3 ok t/66-args-h.t ..... 1..4 ok 1 - Best didn't crash ok 2 ok 3 ok 4 ok t/67-code-h.t ..... 1..3 ok 1 - Best didn't crash ok 2 ok 3 ok t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text ok 3 - lib/Best.pm contains no boilerplate text ok t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/Best.pm ok All tests successful. Files=23, Tests=101, 5 wallclock secs ( 0.13 usr 0.03 sys + 2.55 cusr 0.45 csys = 3.16 CPU) Result: PASS make[1]: Leaving directory '/build/libbest-perl-0.15' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j16 install DESTDIR=/build/libbest-perl-0.15/debian/libbest-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libbest-perl-0.15' "/usr/bin/perl" "-Iinc" "-Iblib/arch" "-Iinc" "-Iblib/lib" Tests.PL Tests Writing test t/50-basic.t Writing test t/51-basic-a.t Writing test t/52-best.t Writing test t/53-onearg.t Writing test t/54-args-a.t Writing test t/55-noargs.t Writing test t/56-ver.t Writing test t/57-exist-a.t Writing test t/58-exist.t Writing test t/59-code.t Writing test t/60-hash.t Writing test t/61-hash-a.t Writing test t/62-hash-aa.t Writing test t/63-ver-h.t Writing test t/64-ok-h.t Writing test t/65-if-h.t Writing test t/66-args-h.t Writing test t/67-code-h.t Manifying 1 pod document Installing /build/libbest-perl-0.15/debian/libbest-perl/usr/share/perl5/Best.pm Installing /build/libbest-perl-0.15/debian/libbest-perl/usr/share/man/man3/Best.3pm make[1]: Leaving directory '/build/libbest-perl-0.15' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libbest-perl' in '../libbest-perl_0.15-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libbest-perl_0.15-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3181994 and its subdirectories I: Current time: Tue Feb 21 19:53:33 -12 2023 I: pbuilder-time-stamp: 1677052413 Thu Jan 20 01:30:31 UTC 2022 I: 1st build successful. Starting 2nd build on remote node ionos1-amd64.debian.net. Thu Jan 20 01:30:31 UTC 2022 I: Preparing to do remote build '2' on ionos1-amd64.debian.net. Thu Jan 20 01:32:36 UTC 2022 I: Deleting $TMPDIR on ionos1-amd64.debian.net. Thu Jan 20 01:32:37 UTC 2022 I: libbest-perl_0.15-2_amd64.changes: Format: 1.8 Date: Fri, 30 Mar 2018 11:54:15 +0300 Source: libbest-perl Binary: libbest-perl Architecture: all Version: 0.15-2 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Niko Tyni Description: libbest-perl - fallbackable module loader Changes: libbest-perl (0.15-2) unstable; urgency=medium . * Team upload. . [ Salvatore Bonaccorso ] * Change Vcs-Git to canonical URI (git://anonscm.debian.org) * Change search.cpan.org based URIs to metacpan.org based URIs . [ gregor herrmann ] * Strip trailing slash from metacpan URLs. . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Niko Tyni ] * Update to debhelper compat level 10 * Update to Standards-Version 4.1.3 * Declare that the package does not need (fake)root to build * Add Testsuite declaration for autopkgtest-pkg-perl Checksums-Sha1: 9abb184340f72885787022f451ebdeec83f7c242 14608 libbest-perl_0.15-2_all.deb eca920894868b394ef5f6bcd11f8bec5a269886c 4856 libbest-perl_0.15-2_amd64.buildinfo Checksums-Sha256: 2d1809f0b99e5fee4364108cd0afa5c744313a35752c21ed2a931463fe83c8f1 14608 libbest-perl_0.15-2_all.deb 45a46cb4074b612b2be73cbef253f8c5ead5b91f0f037516344c9c85e52a951d 4856 libbest-perl_0.15-2_amd64.buildinfo Files: 1368fbef05555738994541d0e8d37900 14608 perl optional libbest-perl_0.15-2_all.deb ad60beb13817b6c2350a2ddb2b00da01 4856 perl optional libbest-perl_0.15-2_amd64.buildinfo Thu Jan 20 01:32:39 UTC 2022 I: will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/libbest-perl_0.15-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/libbest-perl_0.15-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/libbest-perl_0.15-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/b1/libbest-perl_0.15-2_amd64.changes /srv/reproducible-results/rbuild-debian/tmp.3HYdcWggb9/b2/libbest-perl_0.15-2_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.339s) 0.339s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.031s) 0.031s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Jan 20 01:32:40 UTC 2022 I: found no differences in the changes files, and a .buildinfo file also exists. Thu Jan 20 01:32:40 UTC 2022 I: libbest-perl from bullseye built successfully and reproducibly on amd64. Thu Jan 20 01:32:42 UTC 2022 I: Submitting .buildinfo files to external archives: Thu Jan 20 01:32:42 UTC 2022 I: Submitting 8.0K b1/libbest-perl_0.15-2_amd64.buildinfo.asc Thu Jan 20 01:32:44 UTC 2022 I: Submitting 8.0K b2/libbest-perl_0.15-2_amd64.buildinfo.asc Thu Jan 20 01:32:46 UTC 2022 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Jan 20 01:32:46 UTC 2022 I: Done submitting .buildinfo files. Thu Jan 20 01:32:46 UTC 2022 I: Removing signed libbest-perl_0.15-2_amd64.buildinfo.asc files: removed './b1/libbest-perl_0.15-2_amd64.buildinfo.asc' removed './b2/libbest-perl_0.15-2_amd64.buildinfo.asc'