Sat Aug 21 15:05:10 UTC 2021 I: starting to build libi18n-charset-perl/bullseye/arm64 on jenkins on '2021-08-21 15:04' Sat Aug 21 15:05:10 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_12/25119/console.log Sat Aug 21 15:05:10 UTC 2021 I: Downloading source for bullseye/libi18n-charset-perl=1.419-1 --2021-08-21 15:05:10-- http://cdn-fastly.deb.debian.org/debian/pool/main/libi/libi18n-charset-perl/libi18n-charset-perl_1.419-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2635 (2.6K) Saving to: ‘libi18n-charset-perl_1.419-1.dsc’ 0K .. 100% 258M=0s 2021-08-21 15:05:10 (258 MB/s) - ‘libi18n-charset-perl_1.419-1.dsc’ saved [2635/2635] Sat Aug 21 15:05:10 UTC 2021 I: libi18n-charset-perl_1.419-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libi18n-charset-perl Binary: libi18n-charset-perl Architecture: all Version: 1.419-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Niko Tyni Homepage: https://metacpan.org/release/I18N-Charset Standards-Version: 4.5.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libi18n-charset-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libi18n-charset-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl Build-Depends-Indep: libio-capture-perl , libio-string-perl , libtest-pod-coverage-perl , libtest-pod-perl , libunicode-map-perl , libunicode-maputf8-perl , perl Package-List: libi18n-charset-perl deb perl optional arch=all Checksums-Sha1: ca800724ff76538fd44abad28d3ff227fc1d76ed 47147 libi18n-charset-perl_1.419.orig.tar.gz 46c55e54e5961e5f365eb19124574d2f6b2b0311 6040 libi18n-charset-perl_1.419-1.debian.tar.xz Checksums-Sha256: 8eaf3dfd4712b318a27bbd6763bba9d5521bbf2dfddd1348f00d5fa649d12598 47147 libi18n-charset-perl_1.419.orig.tar.gz b44e9f5637407e1faff33619727225d4dc986503b7a4657d35dbe82cc98f0904 6040 libi18n-charset-perl_1.419-1.debian.tar.xz Files: 9d53fb59e53d0e2da17aee97a047f055 47147 libi18n-charset-perl_1.419.orig.tar.gz dfacf8bf449f6abf2b00d74904fcfff9 6040 libi18n-charset-perl_1.419-1.debian.tar.xz Dgit: 255601c7c08cc1da9517b9b37d8b5eb55e5d218d debian archive/debian/1.419-1 https://git.dgit.debian.org/libi18n-charset-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmA6j6lfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgbNRBAAsZAZDHTUHzz9mOjVmNC1FUOdt/FjVVRXSCN1HdGASko+Yq3RfV6mqay9 IQYRawZXVl8M7huuGqLERCGI74QL6cruPDW6zXfXgDSXz1NyPePh2pqabfzuGGez 5YHFxQ7Md9gWMSPHH+QXEIKF+mqdZo93x6htN2ABrntakAc/JhBoSDU+SoyDv2Fw WN946MfWEcyUGzK/MUM0hfxu5/Ay9YixNFvqLfdWlWP1VTwPrGTZdIV0ZcprZH34 rTqKskAStsa/M8N9weyrlCp13xFlA76zhk1/ISTJQ1OVTcKTM204D6XpNcCac8go JupaLHE1/WBdlZW3GHsKNVF/ysDe1tfKqIQKilVwIeI9WkbaKcDan03FVtdfq5+K zK81O2e0gr5xnh74TaWGZTjzTC62l0m3UgMDtp4NCxNxXdeWAY16nJa7AwgVtCrY N7ZkVqE+qkyt+g4hNwOhpaWwEl9r+jFYr0EA3N+/Nn+nq2ysndOu0powQ2nwv1BH nwPjxMgTDXcGIBOO8GVOPQvp16YlaZe/56mIfowyN9IL+aw1TIVb5S5AlOWwMFZY OiIc2N6Bb6oi5HWIRlFDXEVkMTLptYo1BQRveQrDLlRT2WAVwDpR1pgp2k4tBf0n V7NWXIBK2Tg7KWK1LFMkjGkUsyV7SQBzIoQVloTD02oZEJ/Ztis= =pRzo -----END PGP SIGNATURE----- Sat Aug 21 15:05:10 UTC 2021 I: Checking whether the package is not for us Sat Aug 21 15:05:10 UTC 2021 I: Starting 1st build on remote node codethink11-arm64.debian.net. Sat Aug 21 15:05:10 UTC 2021 I: Preparing to do remote build '1' on codethink11-arm64.debian.net. Sat Aug 21 15:06:04 UTC 2021 I: Deleting $TMPDIR on codethink11-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Sep 23 09:28:14 -12 2022 I: pbuilder-time-stamp: 1663968494 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libi18n-charset-perl_1.419-1.dsc] I: copying [./libi18n-charset-perl_1.419.orig.tar.gz] I: copying [./libi18n-charset-perl_1.419-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.HvYrra5h/trustedkeys.kbx': General error gpgv: Signature made Sat Feb 27 06:30:01 2021 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libi18n-charset-perl_1.419-1.dsc dpkg-source: info: extracting libi18n-charset-perl in libi18n-charset-perl-1.419 dpkg-source: info: unpacking libi18n-charset-perl_1.419.orig.tar.gz dpkg-source: info: unpacking libi18n-charset-perl_1.419-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying t_utf8.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/12250/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='12250' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/pbuilderrc_jByu --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/b1 --logfile b1/build.log libi18n-charset-perl_1.419-1.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink11-arm64 4.15.0-154-generic #161-Ubuntu SMP Fri Jul 30 13:01:15 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Aug 4 2021 bash -rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 22 2020 cat -rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 22 2020 chown -rwxr-xr-x 1 root root 138896 Sep 22 2020 cp -rwxr-xr-x 1 root root 129544 Dec 10 2020 dash -rwxr-xr-x 1 root root 101384 Sep 22 2020 date -rwxr-xr-x 1 root root 80984 Sep 22 2020 dd -rwxr-xr-x 1 root root 89824 Sep 22 2020 df -rwxr-xr-x 1 root root 143088 Sep 22 2020 dir -rwxr-xr-x 1 root root 76152 Jul 28 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 64856 Jul 28 2021 findmnt -rwsr-xr-x 1 root root 34824 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 178400 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 93744 Mar 2 2021 gzip -rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 22 2020 ln -rwxr-xr-x 1 root root 52720 Feb 7 2020 login -rwxr-xr-x 1 root root 143088 Sep 22 2020 ls -rwxr-xr-x 1 root root 161960 Jul 28 2021 lsblk -rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 51368 Jul 28 2021 more -rwsr-xr-x 1 root root 51360 Jul 28 2021 mount -rwxr-xr-x 1 root root 14496 Jul 28 2021 mountpoint -rwxr-xr-x 1 root root 134808 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 2021 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 22 2020 rm -rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Sep 23 03:47 sh -> dash -rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 22 2020 stty -rwsr-xr-x 1 root root 67776 Jul 28 2021 su -rwxr-xr-x 1 root root 35672 Sep 22 2020 sync -rwxr-xr-x 1 root root 535768 Feb 16 2021 tar -rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 22 2020 touch -rwxr-xr-x 1 root root 31512 Sep 22 2020 true -rwxr-xr-x 1 root root 14264 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30880 Jul 28 2021 umount -rwxr-xr-x 1 root root 35640 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir -rwxr-xr-x 1 root root 59584 Jul 28 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/12250/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libmodule-install-perl, libio-capture-perl, libio-string-perl, libtest-pod-coverage-perl, libtest-pod-perl, libunicode-map-perl, libunicode-maputf8-perl, perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however: Package libmodule-install-perl is not installed. pbuilder-satisfydepends-dummy depends on libio-capture-perl; however: Package libio-capture-perl is not installed. pbuilder-satisfydepends-dummy depends on libio-string-perl; however: Package libio-string-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libunicode-map-perl; however: Package libunicode-map-perl is not installed. pbuilder-satisfydepends-dummy depends on libunicode-maputf8-perl; however: Package libunicode-maputf8-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libicu67{a} libio-capture-perl{a} libio-string-perl{a} libjcode-pm-perl{a} libmagic-mgc{a} libmagic1{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libsigsegv2{a} libsub-override-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunicode-map-perl{a} libunicode-map8-perl{a} libunicode-maputf8-perl{a} libunicode-string-perl{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget 0 packages upgraded, 47 newly installed, 0 to remove and 0 not upgraded. Need to get 18.7 MB of archives. After unpacking 70.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 libdevel-symdump-perl all 2.18-4 [17.5 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 libfile-remove-perl all 1.60-1 [19.1 kB] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libio-capture-perl all 0.05-4 [29.5 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libio-string-perl all 1.08-3.1 [11.8 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libjcode-pm-perl arm64 2.06-1+b1 [28.4 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 libmodule-scandeps-perl all 1.30-1 [44.9 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libyaml-tiny-perl all 1.73-1 [32.3 kB] Get: 39 http://deb.debian.org/debian bullseye/main arm64 libmodule-install-perl all 1.19-1 [152 kB] Get: 40 http://deb.debian.org/debian bullseye/main arm64 libpod-parser-perl all 1.63-2 [96.1 kB] Get: 41 http://deb.debian.org/debian bullseye/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 42 http://deb.debian.org/debian bullseye/main arm64 libtest-pod-coverage-perl all 1.10-2 [14.5 kB] Get: 43 http://deb.debian.org/debian bullseye/main arm64 libtest-pod-perl all 1.52-1 [14.2 kB] Get: 44 http://deb.debian.org/debian bullseye/main arm64 libunicode-map-perl arm64 0.112-12+b3 [145 kB] Get: 45 http://deb.debian.org/debian bullseye/main arm64 libunicode-string-perl arm64 2.10-1+b6 [99.1 kB] Get: 46 http://deb.debian.org/debian bullseye/main arm64 libunicode-map8-perl arm64 0.13+dfsg-4+b6 [47.6 kB] Get: 47 http://deb.debian.org/debian bullseye/main arm64 libunicode-maputf8-perl all 1.14-1 [17.3 kB] Fetched 18.7 MB in 1s (27.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_arm64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../10-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../23-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../25-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../31-libdevel-symdump-perl_2.18-4_all.deb ... Unpacking libdevel-symdump-perl (2.18-4) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../32-libfile-remove-perl_1.60-1_all.deb ... Unpacking libfile-remove-perl (1.60-1) ... Selecting previously unselected package libio-capture-perl. Preparing to unpack .../33-libio-capture-perl_0.05-4_all.deb ... Unpacking libio-capture-perl (0.05-4) ... Selecting previously unselected package libio-string-perl. Preparing to unpack .../34-libio-string-perl_1.08-3.1_all.deb ... Unpacking libio-string-perl (1.08-3.1) ... Selecting previously unselected package libjcode-pm-perl. Preparing to unpack .../35-libjcode-pm-perl_2.06-1+b1_arm64.deb ... Unpacking libjcode-pm-perl (2.06-1+b1) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../36-libmodule-scandeps-perl_1.30-1_all.deb ... Unpacking libmodule-scandeps-perl (1.30-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../37-libyaml-tiny-perl_1.73-1_all.deb ... Unpacking libyaml-tiny-perl (1.73-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../38-libmodule-install-perl_1.19-1_all.deb ... Unpacking libmodule-install-perl (1.19-1) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../39-libpod-parser-perl_1.63-2_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.63-2) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../40-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../41-libtest-pod-coverage-perl_1.10-2_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-2) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../42-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Selecting previously unselected package libunicode-map-perl. Preparing to unpack .../43-libunicode-map-perl_0.112-12+b3_arm64.deb ... Unpacking libunicode-map-perl (0.112-12+b3) ... Selecting previously unselected package libunicode-string-perl. Preparing to unpack .../44-libunicode-string-perl_2.10-1+b6_arm64.deb ... Unpacking libunicode-string-perl (2.10-1+b6) ... Selecting previously unselected package libunicode-map8-perl. Preparing to unpack .../45-libunicode-map8-perl_0.13+dfsg-4+b6_arm64.deb ... Unpacking libunicode-map8-perl (0.13+dfsg-4+b6) ... Selecting previously unselected package libunicode-maputf8-perl. Preparing to unpack .../46-libunicode-maputf8-perl_1.14-1_all.deb ... Unpacking libunicode-maputf8-perl (1.14-1) ... Setting up libfile-remove-perl (1.60-1) ... Setting up libjcode-pm-perl (2.06-1+b1) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up libunicode-string-perl (2.10-1+b6) ... Setting up libio-capture-perl (0.05-4) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libunicode-map8-perl (0.13+dfsg-4+b6) ... Setting up libtest-pod-perl (1.52-1) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libyaml-tiny-perl (1.73-1) ... Setting up libio-string-perl (1.08-3.1) ... Setting up libunicode-map-perl (0.112-12+b3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libunicode-maputf8-perl (1.14-1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up libpod-parser-perl (1.63-2) ... Setting up autopoint (0.21-4) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libdevel-symdump-perl (2.18-4) ... Setting up libelf1:arm64 (0.183-1) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libmodule-scandeps-perl (1.30-1) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libmodule-install-perl (1.19-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libtest-pod-coverage-perl (1.10-2) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/libi18n-charset-perl-1.419/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libi18n-charset-perl_1.419-1_source.changes dpkg-buildpackage: info: source package libi18n-charset-perl dpkg-buildpackage: info: source version 1.419-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/libi18n-charset-perl-1.419' dh_auto_clean [ ! -d /build/libi18n-charset-perl-1.419/inc.save ] || mv /build/libi18n-charset-perl-1.419/inc.save /build/libi18n-charset-perl-1.419/inc make[1]: Leaving directory '/build/libi18n-charset-perl-1.419' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/libi18n-charset-perl-1.419' [ ! -d /build/libi18n-charset-perl-1.419/inc ] || mv /build/libi18n-charset-perl-1.419/inc /build/libi18n-charset-perl-1.419/inc.save dh_auto_configure perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -fdebug-prefix-map=/build/libi18n-charset-perl-1.419=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -fdebug-prefix-map=/build/libi18n-charset-perl-1.419=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" include /build/libi18n-charset-perl-1.419/inc/Module/Install.pm include inc/Module/Install/Metadata.pm include inc/Module/Install/Base.pm include inc/Module/Install/Makefile.pm include inc/Module/Install/WriteAll.pm include inc/Module/Install/Win32.pm include inc/Module/Install/Can.pm include inc/Module/Install/Fetch.pm Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for I18N::Charset Writing MYMETA.yml and MYMETA.json Writing META.yml make[1]: Leaving directory '/build/libi18n-charset-perl-1.419' dh_auto_build make -j8 make[1]: Entering directory '/build/libi18n-charset-perl-1.419' cp lib/I18N/Charset.pm blib/lib/I18N/Charset.pm Manifying 1 pod document make[1]: Leaving directory '/build/libi18n-charset-perl-1.419' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libi18n-charset-perl-1.419' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/bug1.t .......... 1..3 ok 1 - use I18N::Charset; ok 2 ok 3 - test literal -- big5 ok t/enco.t .......... ok 1 - use I18N::Charset; ok 2 - no argument ok 3 - undef argument ok 4 - empty argument ok 5 - junk argument ok 6 - 999999 argument ok 7 - arrayref argument ok 8 ok 9 ok 10 ok 11 - x-x-sjis ok 12 - normal literal -- ASCII ok 13 - normal -- G.B.K. ok 14 - identity -- cp1251 ok 15 - builtin alias -- cp1047 ok 16 - builtin alias -- cp37 ok 17 - builtin alias -- cp37 ok 18 - builtin alias -- cp932 ok 19 - builtin alias -- gb2312-raw ok 20 ok 21 - alias literal -- my-japanese1 ok 22 - alias equal -- my-japanese1 ok 23 ok 24 - alias equal -- my-japanese2 ok 25 - set alias my-japanese3 ok 26 - alias literal -- my-japanese3 ok 27 - alias equal -- my-japanese3 ok 28 - alias-to-alias ok 29 - alias equal -- my-japanese4 ok 30 - alias equal -- my-japanese4 1..30 ok # There are 258 IANA charset names registered t/iana.t .......... ok 1 - use I18N::Charset; ok 2 - no arg ok 3 - undef argument ok 4 - empty argument ok 5 - junk argument ok 6 - None argument ok 7 - arrayref argument ok 8 - windows-1-2-5-1 ok 9 - windows-1252 eq ok 10 - win-latin-1 ok 11 - windows-1252 ne ok 12 - windows-1253 ok 13 - Shift_JIS ok 14 - sjis ok 15 - x-sjis ok 16 - x-x-sjis ok 17 - Unicode-2-0-utf-8 ok 18 - ISO-8859-16 ok 19 - latin 10 ok 20 - UTF-7 IMAP ok 21 - add alias1 ok 22 - alias1 ok 23 - junk ok 24 - add alias2 ok 25 - alias2 ok 26 - ok 27 - ok 28 - 1..28 ok # App::Info::Lib::Iconv is not installed t/libi.t .......... ok 1 - use I18N::Charset; ok 2 - no argument ok 3 - undef argument ok 4 - empty argument ok 5 - junk argument ok 6 - 999999 argument ok 7 - arrayref argument ok 8 ok 9 # skip App::Info::Lib::Iconv is not installed ok 10 # skip App::Info::Lib::Iconv is not installed ok 11 # skip App::Info::Lib::Iconv is not installed ok 12 # skip App::Info::Lib::Iconv is not installed ok 13 # skip App::Info::Lib::Iconv is not installed ok 14 # skip App::Info::Lib::Iconv is not installed ok 15 # skip App::Info::Lib::Iconv is not installed ok 16 # skip App::Info::Lib::Iconv is not installed ok 17 # skip App::Info::Lib::Iconv is not installed ok 18 # skip App::Info::Lib::Iconv is not installed ok 19 # skip App::Info::Lib::Iconv is not installed ok 20 # skip App::Info::Lib::Iconv is not installed ok 21 # skip App::Info::Lib::Iconv is not installed ok 22 # skip App::Info::Lib::Iconv is not installed ok 23 # skip App::Info::Lib::Iconv is not installed ok 24 # skip App::Info::Lib::Iconv is not installed ok 25 1..25 ok t/map8.t .......... ok 1 - use I18N::Charset; ok 2 - ok 3 - ok 4 - ok 5 - ok 6 - ok 7 - ok 8 - ok 9 - ok 10 - ok 11 - ok 12 - ok 13 - ok 14 - ok 15 - ok 16 - ok 17 - ok 18 - ok 19 - ok 20 - ok 21 - ok 22 - ok 23 - ok 24 - 1..24 ok t/mib.t ........... ok 1 - use I18N::Charset; ok 2 - no argument ok 3 - undef argument ok 4 - empty argument ok 5 - illegal code ok 6 - illegal code ok 7 - "None" is ignored ok 8 - illegal argument ok 9 - no argument ok 10 - undef argument ok 11 - empty argument ok 12 - illegal code ok 13 - illegal code ok 14 - "None" is ignored ok 15 - illegal argument ok 16 - 3 is US-ASCII ok 17 - 106 is UTF-8 ok 18 - 1015 is UTF-16 ok 19 - 17 is Shift_JIS ok 20 - ecma cyr is 77 ok 21 - UTF-8 is 106 ok 22 - UTF-16 is 1015 ok 23 - s h i f t is 17 ok 24 - first entry ok 25 - last entry 1..25 ok t/mime.t .......... ok 1 - use I18N::Charset; ok 2 - no argument ok 3 - undef argument ok 4 - empty argument ok 5 - junk argument ok 6 - 999999 argument ok 7 - arrayref argument ok 8 - charset has no mime name ok 9 - us ok 10 - Alias is preferred, try Name ok 11 - Alias is preferred, try another Alias ok 12 - Alias is preferred, try preferred Alias ok 13 - Name is preferred, try Alias ok 14 - Name is preferred, try Name 1..14 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on I18N::Charset ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/I18N/Charset.pm ok t/rt33087.t ....... 1..3 ok 1 - use I18N::Charset; ok 2 - iana literal koi8-r ok 3 - map8 literal koi8-r ok t/umap.t .......... ok 1 - no argument ok 2 - undef argument ok 3 - empty argument ok 4 - junk argument ok 5 - 999999 argument ok 6 - arrayref argument ok 7 - +alias1 ok 8 - =alias1 ok 9 - dummy mib ok 10 - dummy mib ok 11 - same as iana ok 12 - identical ok 13 - +alias2 ok 14 - =alias2 ok 15 - +alias3 ok 16 - =alias3 1..16 ok t/utf8.t .......... ok 1 - use I18N::Charset; ok 2 - ok 3 - ok 4 - ok 5 - ok 6 - ok 7 - Unicode-2-0-utf-8 ok 8 - UCS-2 ok 9 - U.C.S. 4 ok 10 - Adobe Ding Bats ok 11 - M.S. Turkish ok 12 - windows-1-2-5-1 ok 13 - windows-1252 eq ok 14 - win-latin-1 ok 15 - windows-1252 ne ok 16 - windows-1253 ok 17 - Adobe Zapf Ding Bats ok 18 - c p 1 0 0 7 9 ok 19 - Shift_JIS ok 20 - sjis ok 21 - x-sjis ok 22 - x-x-sjis 1..22 ok All tests successful. Files=12, Tests=192, 6 wallclock secs ( 0.17 usr 0.02 sys + 5.45 cusr 0.51 csys = 6.15 CPU) Result: PASS make[1]: Leaving directory '/build/libi18n-charset-perl-1.419' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j8 install DESTDIR=/build/libi18n-charset-perl-1.419/debian/libi18n-charset-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libi18n-charset-perl-1.419' Manifying 1 pod document Installing /build/libi18n-charset-perl-1.419/debian/libi18n-charset-perl/usr/share/perl5/I18N/Charset.pm Installing /build/libi18n-charset-perl-1.419/debian/libi18n-charset-perl/usr/share/man/man3/I18N::Charset.3pm make[1]: Leaving directory '/build/libi18n-charset-perl-1.419' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libi18n-charset-perl' in '../libi18n-charset-perl_1.419-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libi18n-charset-perl_1.419-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/12250 and its subdirectories I: Current time: Fri Sep 23 09:29:03 -12 2022 I: pbuilder-time-stamp: 1663968543 Sat Aug 21 15:06:05 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink16-arm64.debian.net. Sat Aug 21 15:06:05 UTC 2021 I: Preparing to do remote build '2' on codethink16-arm64.debian.net. Sat Aug 21 15:06:42 UTC 2021 I: Deleting $TMPDIR on codethink16-arm64.debian.net. Sat Aug 21 15:06:43 UTC 2021 I: libi18n-charset-perl_1.419-1_arm64.changes: Format: 1.8 Date: Sat, 27 Feb 2021 19:28:11 +0100 Source: libi18n-charset-perl Binary: libi18n-charset-perl Architecture: all Version: 1.419-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libi18n-charset-perl - Perl module for mapping character set names to IANA names Changes: libi18n-charset-perl (1.419-1) unstable; urgency=medium . [ Debian Janitor ] * Bump debhelper from old 10 to 12. * Set debhelper-compat version in Build-Depends. . [ gregor herrmann ] * debian/watch: use uscan version 4. * Import upstream version 1.419. * Use packaged libmodule-install-perl instead of convenience copy. * Declare compliance with Debian Policy 4.5.1. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . * Bump debhelper-compat to 13. * Update years of packaging copyright. * Add an (empty) debian/tests/pkg-perl/syntax-skip to enable more autopkgtests. Checksums-Sha1: 052d7131bf96c723b5e7f599b2bd3baa718a0377 32476 libi18n-charset-perl_1.419-1_all.deb c4917466a3422552bd7ff58e114d23e2d4318169 5175 libi18n-charset-perl_1.419-1_arm64.buildinfo Checksums-Sha256: 2383dc33d26d82de4c5cb79d583758ecba381f0074c34ed404bab911a6167f20 32476 libi18n-charset-perl_1.419-1_all.deb 01da8e00d7406f03ee01affcf27dd1b2beb61bc387970d6761ad575c0e35d45e 5175 libi18n-charset-perl_1.419-1_arm64.buildinfo Files: c96288910075ddf80c127e3fa7733782 32476 perl optional libi18n-charset-perl_1.419-1_all.deb 17b31e01b00e96a7761ce5c860164cdd 5175 perl optional libi18n-charset-perl_1.419-1_arm64.buildinfo Sat Aug 21 15:06:44 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/libi18n-charset-perl_1.419-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/libi18n-charset-perl_1.419-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/libi18n-charset-perl_1.419-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/b1/libi18n-charset-perl_1.419-1_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.sU40MJRjJJ/b2/libi18n-charset-perl_1.419-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.349s) 0.349s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.028s) 0.028s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Sat Aug 21 15:06:46 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Sat Aug 21 15:06:46 UTC 2021 I: libi18n-charset-perl from bullseye built successfully and reproducibly on arm64. Sat Aug 21 15:06:48 UTC 2021 I: Submitting .buildinfo files to external archives: Sat Aug 21 15:06:48 UTC 2021 I: Submitting 8.0K b1/libi18n-charset-perl_1.419-1_arm64.buildinfo.asc Sat Aug 21 15:06:49 UTC 2021 I: Submitting 8.0K b2/libi18n-charset-perl_1.419-1_arm64.buildinfo.asc Sat Aug 21 15:06:49 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Sat Aug 21 15:06:49 UTC 2021 I: Done submitting .buildinfo files. Sat Aug 21 15:06:49 UTC 2021 I: Removing signed libi18n-charset-perl_1.419-1_arm64.buildinfo.asc files: removed './b1/libi18n-charset-perl_1.419-1_arm64.buildinfo.asc' removed './b2/libi18n-charset-perl_1.419-1_arm64.buildinfo.asc'