Wed Aug 18 03:39:10 UTC 2021 I: starting to build ros-rosinstall/bullseye/arm64 on jenkins on '2021-08-18 03:38' Wed Aug 18 03:39:10 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_31/24785/console.log Wed Aug 18 03:39:10 UTC 2021 I: Downloading source for bullseye/ros-rosinstall=0.7.8-4 --2021-08-18 03:39:11-- http://cdn-fastly.deb.debian.org/debian/pool/main/r/ros-rosinstall/ros-rosinstall_0.7.8-4.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2272 (2.2K) Saving to: ‘ros-rosinstall_0.7.8-4.dsc’ 0K .. 100% 118M=0s 2021-08-18 03:39:11 (118 MB/s) - ‘ros-rosinstall_0.7.8-4.dsc’ saved [2272/2272] Wed Aug 18 03:39:11 UTC 2021 I: ros-rosinstall_0.7.8-4.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: ros-rosinstall Binary: python3-rosinstall Architecture: all Version: 0.7.8-4 Maintainer: Debian Science Maintainers Uploaders: Thomas Moulard , Jochen Sprickerhof , Leopold Palomo-Avellaneda Homepage: https://wiki.ros.org/rosinstall Standards-Version: 4.4.0 Vcs-Browser: https://salsa.debian.org/science-team/ros-rosinstall Vcs-Git: https://salsa.debian.org/science-team/ros-rosinstall.git Testsuite: autopkgtest-pkg-python Build-Depends: debhelper-compat (= 12), dh-python, python3-all, python3-setuptools, git, mercurial, zsh, python3-wstool, python3-yaml, python3-mock, python3-catkin-pkg, python3-rosdistro Package-List: python3-rosinstall deb python optional arch=all Checksums-Sha1: f8a23165673b8be37139004bd3f62228230a3317 64864 ros-rosinstall_0.7.8.orig.tar.gz 8a4b005171ab89c380d1a9417f5746827480b7e4 5396 ros-rosinstall_0.7.8-4.debian.tar.xz Checksums-Sha256: ce1266e63aaefccabb4b0aefc56f8cceb45d4e188a4ecad2f623cbb4a5b1843f 64864 ros-rosinstall_0.7.8.orig.tar.gz b27ea6506f952767df7cdf174fecdb3116caf4f8902cdd7db014976937a8f3dc 5396 ros-rosinstall_0.7.8-4.debian.tar.xz Files: 0c95e8b33f2275308328adccfb29eed0 64864 ros-rosinstall_0.7.8.orig.tar.gz f6bfd4921a53a9f85c86dd855f84350a 5396 ros-rosinstall_0.7.8-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEc7KZy9TurdzAF+h6W//cwljmlDMFAl2O/+0ACgkQW//cwljm lDOUzhAAiHxrmubGd70zGLi6MTskZIHlreWwF+c5ur6Vdo2s4jAq35uSo83buiX3 xCAv5Wa9QUB1rCc/a3lPMG17ip4T4EvJnWhglomT16uWI6ovJCi9DPY7ezVyGZG8 5oKXF8nk0N7UGom2OpACeRbh9WSyao3IcSE9+V0YRUtIK502iBZ5toKCefh1Z2m3 83I0ac/Jutx9kgLzCf+i4yU5Juiu5aIM6CRL4yRAe4s56BijOGZME8EfdBUNeEag /nTbWUOPcyfoRpoMO1YrQuGR8LVE3jWTzqNcioLj6OaUG2AsBcp6ixc5iKzrzI/M VBliPTxYLwKRb8dQer3edyBYWj8NtaXwtGENcvb61Jz9cfy8BLysf7SDGJoRuxWe MVGGP15rozFQ2sburHga1j9Mf91kRhX4ZUZn0CaEiqElKCBbzy0T1Q2Svu3Dtx9Z 5gohYGnNw7NkKNrjq2ikICObiXA4nBib4srf1wh9+vndq/TH+MKBJgDOo2bgjita mUoPLJja4NfFAI+rx9cwDmZkO0rJITdGzR//Uyh2jzMnmqfyKG0zY1KjURW/8sDo JtJD7CuQLl0g8XYJGwEaYMcYcJUW8l1nXGO3V53FcOVUfueC3NpHg4Im7/V2rZdi vNcC4LiRxuvbEmhyI62wi5cNGHSTpAIYYHjgGHzyR86ihThvUvM= =dltR -----END PGP SIGNATURE----- Wed Aug 18 03:39:11 UTC 2021 I: Checking whether the package is not for us Wed Aug 18 03:39:11 UTC 2021 I: Starting 1st build on remote node codethink16-arm64.debian.net. Wed Aug 18 03:39:11 UTC 2021 I: Preparing to do remote build '1' on codethink16-arm64.debian.net. Wed Aug 18 03:42:35 UTC 2021 I: Deleting $TMPDIR on codethink16-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Aug 17 15:39:15 -12 2021 I: pbuilder-time-stamp: 1629257955 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ros-rosinstall_0.7.8-4.dsc] I: copying [./ros-rosinstall_0.7.8.orig.tar.gz] I: copying [./ros-rosinstall_0.7.8-4.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.CWcGxIHU/trustedkeys.kbx': General error gpgv: Signature made Fri Sep 27 18:38:37 2019 -12 gpgv: using RSA key 73B299CBD4EEADDCC017E87A5BFFDCC258E69433 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ros-rosinstall_0.7.8-4.dsc dpkg-source: info: extracting ros-rosinstall in ros-rosinstall-0.7.8 dpkg-source: info: unpacking ros-rosinstall_0.7.8.orig.tar.gz dpkg-source: info: unpacking ros-rosinstall_0.7.8-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Add-default-ROS_ROOT-for-rosbuild.patch dpkg-source: info: applying 0002-Disable-tests-with-network-connection.patch dpkg-source: info: applying 0004-Add-missing-dependency.patch dpkg-source: info: applying 0004-Add-fake-identity-for-VCSs-107.patch dpkg-source: info: applying 0005-Adopt-to-new-get_info_table_raw_csv-API.patch dpkg-source: info: applying 0006-Switch-generated-setup.sh-to-Python-3.patch dpkg-source: info: applying 0007-Disable-test-using-Python-2.patch dpkg-source: info: applying 0008-Fix-Python-3-detection.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/17880/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='17880' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/pbuilderrc_Mc1f --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/b1 --logfile b1/build.log ros-rosinstall_0.7.8-4.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink16-arm64 4.15.0-154-generic #161-Ubuntu SMP Fri Jul 30 13:01:15 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Aug 4 08:25 bash -rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 22 2020 cat -rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 22 2020 chown -rwxr-xr-x 1 root root 138896 Sep 22 2020 cp -rwxr-xr-x 1 root root 129544 Dec 10 2020 dash -rwxr-xr-x 1 root root 101384 Sep 22 2020 date -rwxr-xr-x 1 root root 80984 Sep 22 2020 dd -rwxr-xr-x 1 root root 89824 Sep 22 2020 df -rwxr-xr-x 1 root root 143088 Sep 22 2020 dir -rwxr-xr-x 1 root root 76152 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 64856 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 34824 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 178400 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 93744 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 22 2020 ln -rwxr-xr-x 1 root root 52720 Feb 7 2020 login -rwxr-xr-x 1 root root 143088 Sep 22 2020 ls -rwxr-xr-x 1 root root 161960 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 51368 Jul 28 07:09 more -rwsr-xr-x 1 root root 51360 Jul 28 07:09 mount -rwxr-xr-x 1 root root 14496 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 134808 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 22 2020 rm -rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 15 21:24 sh -> dash -rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 22 2020 stty -rwsr-xr-x 1 root root 67776 Jul 28 07:09 su -rwxr-xr-x 1 root root 35672 Sep 22 2020 sync -rwxr-xr-x 1 root root 535768 Feb 16 21:55 tar -rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 22 2020 touch -rwxr-xr-x 1 root root 31512 Sep 22 2020 true -rwxr-xr-x 1 root root 14264 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 30880 Jul 28 07:09 umount -rwxr-xr-x 1 root root 35640 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir -rwxr-xr-x 1 root root 59584 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/17880/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), dh-python, python3-all, python3-setuptools, git, mercurial, zsh, python3-wstool, python3-yaml, python3-mock, python3-catkin-pkg, python3-rosdistro dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on git; however: Package git is not installed. pbuilder-satisfydepends-dummy depends on mercurial; however: Package mercurial is not installed. pbuilder-satisfydepends-dummy depends on zsh; however: Package zsh is not installed. pbuilder-satisfydepends-dummy depends on python3-wstool; however: Package python3-wstool is not installed. pbuilder-satisfydepends-dummy depends on python3-yaml; however: Package python3-yaml is not installed. pbuilder-satisfydepends-dummy depends on python3-mock; however: Package python3-mock is not installed. pbuilder-satisfydepends-dummy depends on python3-catkin-pkg; however: Package python3-catkin-pkg is not installed. pbuilder-satisfydepends-dummy depends on python3-rosdistro; however: Package python3-rosdistro is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} distro-info-data{a} docutils-common{a} dwz{a} file{a} gettext{a} gettext-base{a} git{a} git-man{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcap2{a} libcurl3-gnutls{a} libdebhelper-perl{a} libelf1{a} liberror-perl{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libldap-2.4-2{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libnghttp2-14{a} libpipeline1{a} libpsl5{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssh2-1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} lsb-release{a} m4{a} man-db{a} media-types{a} mercurial{a} mercurial-common{a} po-debconf{a} python3{a} python3-all{a} python3-catkin-pkg{a} python3-dateutil{a} python3-distro{a} python3-distutils{a} python3-docutils{a} python3-lib2to3{a} python3-minimal{a} python3-mock{a} python3-pbr{a} python3-pkg-resources{a} python3-pyparsing{a} python3-roman{a} python3-rosdistro{a} python3-rospkg{a} python3-setuptools{a} python3-six{a} python3-vcstools{a} python3-wstool{a} python3-yaml{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} ucf{a} xml-core{a} zsh{a} zsh-common{a} The following packages are RECOMMENDED but will NOT be installed: brz bzr ca-certificates curl less libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libpaper-utils libsasl2-modules lynx openssh-client publicsuffix python3-pil python3-pygments subversion wget 0 packages upgraded, 87 newly installed, 0 to remove and 0 not upgraded. Need to get 42.0 MB of archives. After unpacking 172 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-minimal arm64 3.9.2-1 [797 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libexpat1 arm64 2.2.10-2 [83.1 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 python3.9-minimal arm64 3.9.2-1 [1884 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 python3-minimal arm64 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 libmpdec3 arm64 2.5.1-1 [84.4 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 libreadline8 arm64 8.1-1 [160 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-stdlib arm64 3.9.2-1 [1658 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 python3.9 arm64 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 libpython3-stdlib arm64 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 python3 arm64 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 sgml-base all 1.30 [15.1 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 ucf all 3.0043 [74.0 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 39 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 40 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 41 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 42 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 43 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 44 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 45 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 46 http://deb.debian.org/debian bullseye/main arm64 python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 47 http://deb.debian.org/debian bullseye/main arm64 python3-distutils all 3.9.2-1 [143 kB] Get: 48 http://deb.debian.org/debian bullseye/main arm64 dh-python all 4.20201102+nmu1 [99.4 kB] Get: 49 http://deb.debian.org/debian bullseye/main arm64 distro-info-data all 0.51 [7508 B] Get: 50 http://deb.debian.org/debian bullseye/main arm64 xml-core all 0.18+nmu1 [23.8 kB] Get: 51 http://deb.debian.org/debian bullseye/main arm64 docutils-common all 0.16+dfsg-4 [129 kB] Get: 52 http://deb.debian.org/debian bullseye/main arm64 libbrotli1 arm64 1.0.9-2+b2 [267 kB] Get: 53 http://deb.debian.org/debian bullseye/main arm64 libsasl2-modules-db arm64 2.1.27+dfsg-2.1 [69.3 kB] Get: 54 http://deb.debian.org/debian bullseye/main arm64 libsasl2-2 arm64 2.1.27+dfsg-2.1 [105 kB] Get: 55 http://deb.debian.org/debian bullseye/main arm64 libldap-2.4-2 arm64 2.4.57+dfsg-3 [222 kB] Get: 56 http://deb.debian.org/debian bullseye/main arm64 libnghttp2-14 arm64 1.43.0-1 [73.8 kB] Get: 57 http://deb.debian.org/debian bullseye/main arm64 libpsl5 arm64 0.21.0-1.2 [57.1 kB] Get: 58 http://deb.debian.org/debian bullseye/main arm64 librtmp1 arm64 2.4+20151223.gitfa8646d.1-2+b2 [59.4 kB] Get: 59 http://deb.debian.org/debian bullseye/main arm64 libssh2-1 arm64 1.9.0-2 [150 kB] Get: 60 http://deb.debian.org/debian bullseye/main arm64 libcurl3-gnutls arm64 7.74.0-1.3+b1 [318 kB] Get: 61 http://deb.debian.org/debian bullseye/main arm64 liberror-perl all 0.17029-1 [31.0 kB] Get: 62 http://deb.debian.org/debian bullseye/main arm64 git-man all 1:2.30.2-1 [1827 kB] Get: 63 http://deb.debian.org/debian bullseye/main arm64 git arm64 1:2.30.2-1 [5428 kB] Get: 64 http://deb.debian.org/debian bullseye/main arm64 libcap2 arm64 1:2.44-1 [23.2 kB] Get: 65 http://deb.debian.org/debian bullseye/main arm64 libyaml-0-2 arm64 0.2.2-1 [45.1 kB] Get: 66 http://deb.debian.org/debian bullseye/main arm64 lsb-release all 11.1.0 [27.9 kB] Get: 67 http://deb.debian.org/debian bullseye/main arm64 mercurial-common all 5.6.1-4 [2726 kB] Get: 68 http://deb.debian.org/debian bullseye/main arm64 mercurial arm64 5.6.1-4 [328 kB] Get: 69 http://deb.debian.org/debian bullseye/main arm64 python3-all arm64 3.9.2-3 [1056 B] Get: 70 http://deb.debian.org/debian bullseye/main arm64 python3-six all 1.16.0-2 [17.5 kB] Get: 71 http://deb.debian.org/debian bullseye/main arm64 python3-dateutil all 2.8.1-6 [79.2 kB] Get: 72 http://deb.debian.org/debian bullseye/main arm64 python3-roman all 2.0.0-5 [9064 B] Get: 73 http://deb.debian.org/debian bullseye/main arm64 python3-docutils all 0.16+dfsg-4 [384 kB] Get: 74 http://deb.debian.org/debian bullseye/main arm64 python3-pyparsing all 2.4.7-1 [109 kB] Get: 75 http://deb.debian.org/debian bullseye/main arm64 python3-pkg-resources all 52.0.0-4 [190 kB] Get: 76 http://deb.debian.org/debian bullseye/main arm64 python3-catkin-pkg all 0.4.23-1 [46.9 kB] Get: 77 http://deb.debian.org/debian bullseye/main arm64 python3-distro all 1.5.0-1 [17.1 kB] Get: 78 http://deb.debian.org/debian bullseye/main arm64 python3-setuptools all 52.0.0-4 [366 kB] Get: 79 http://deb.debian.org/debian bullseye/main arm64 python3-pbr all 5.5.0-2 [60.4 kB] Get: 80 http://deb.debian.org/debian bullseye/main arm64 python3-mock all 4.0.3-1 [34.6 kB] Get: 81 http://deb.debian.org/debian bullseye/main arm64 python3-yaml arm64 5.3.1-5 [118 kB] Get: 82 http://deb.debian.org/debian bullseye/main arm64 python3-rospkg all 1.2.9-1 [26.0 kB] Get: 83 http://deb.debian.org/debian bullseye/main arm64 python3-rosdistro all 0.8.3-1 [36.0 kB] Get: 84 http://deb.debian.org/debian bullseye/main arm64 python3-vcstools all 0.1.42-3 [33.7 kB] Get: 85 http://deb.debian.org/debian bullseye/main arm64 python3-wstool all 0.1.18-2 [40.1 kB] Get: 86 http://deb.debian.org/debian bullseye/main arm64 zsh-common all 5.8-6 [3940 kB] Get: 87 http://deb.debian.org/debian bullseye/main arm64 zsh arm64 5.8-6+b2 [848 kB] Fetched 42.0 MB in 2s (19.1 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-8_arm64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../1-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../3-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:arm64. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_arm64.deb ... Unpacking libpython3.9-minimal:arm64 (3.9.2-1) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../6-libexpat1_2.2.10-2_arm64.deb ... Unpacking libexpat1:arm64 (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_arm64.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:arm64 (3.9.2-1) ... Setting up libexpat1:arm64 (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20513 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_arm64.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:arm64. Preparing to unpack .../2-libmpdec3_2.5.1-1_arm64.deb ... Unpacking libmpdec3:arm64 (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:arm64. Preparing to unpack .../4-libreadline8_8.1-1_arm64.deb ... Unpacking libreadline8:arm64 (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:arm64. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_arm64.deb ... Unpacking libpython3.9-stdlib:arm64 (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_arm64.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20934 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_arm64.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.30_all.deb ... Unpacking sgml-base (1.30) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../04-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../07-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../08-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../09-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../10-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../11-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../12-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../13-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../14-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../15-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../16-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../17-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../18-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../21-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../23-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../24-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../29-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../30-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../31-dh-python_4.20201102+nmu1_all.deb ... Unpacking dh-python (4.20201102+nmu1) ... Selecting previously unselected package distro-info-data. Preparing to unpack .../32-distro-info-data_0.51_all.deb ... Unpacking distro-info-data (0.51) ... Selecting previously unselected package xml-core. Preparing to unpack .../33-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../34-docutils-common_0.16+dfsg-4_all.deb ... Unpacking docutils-common (0.16+dfsg-4) ... Selecting previously unselected package libbrotli1:arm64. Preparing to unpack .../35-libbrotli1_1.0.9-2+b2_arm64.deb ... Unpacking libbrotli1:arm64 (1.0.9-2+b2) ... Selecting previously unselected package libsasl2-modules-db:arm64. Preparing to unpack .../36-libsasl2-modules-db_2.1.27+dfsg-2.1_arm64.deb ... Unpacking libsasl2-modules-db:arm64 (2.1.27+dfsg-2.1) ... Selecting previously unselected package libsasl2-2:arm64. Preparing to unpack .../37-libsasl2-2_2.1.27+dfsg-2.1_arm64.deb ... Unpacking libsasl2-2:arm64 (2.1.27+dfsg-2.1) ... Selecting previously unselected package libldap-2.4-2:arm64. Preparing to unpack .../38-libldap-2.4-2_2.4.57+dfsg-3_arm64.deb ... Unpacking libldap-2.4-2:arm64 (2.4.57+dfsg-3) ... Selecting previously unselected package libnghttp2-14:arm64. Preparing to unpack .../39-libnghttp2-14_1.43.0-1_arm64.deb ... Unpacking libnghttp2-14:arm64 (1.43.0-1) ... Selecting previously unselected package libpsl5:arm64. Preparing to unpack .../40-libpsl5_0.21.0-1.2_arm64.deb ... Unpacking libpsl5:arm64 (0.21.0-1.2) ... Selecting previously unselected package librtmp1:arm64. Preparing to unpack .../41-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_arm64.deb ... Unpacking librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:arm64. Preparing to unpack .../42-libssh2-1_1.9.0-2_arm64.deb ... Unpacking libssh2-1:arm64 (1.9.0-2) ... Selecting previously unselected package libcurl3-gnutls:arm64. Preparing to unpack .../43-libcurl3-gnutls_7.74.0-1.3+b1_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.74.0-1.3+b1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../44-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package git-man. Preparing to unpack .../45-git-man_1%3a2.30.2-1_all.deb ... Unpacking git-man (1:2.30.2-1) ... Selecting previously unselected package git. Preparing to unpack .../46-git_1%3a2.30.2-1_arm64.deb ... Unpacking git (1:2.30.2-1) ... Selecting previously unselected package libcap2:arm64. Preparing to unpack .../47-libcap2_1%3a2.44-1_arm64.deb ... Unpacking libcap2:arm64 (1:2.44-1) ... Selecting previously unselected package libyaml-0-2:arm64. Preparing to unpack .../48-libyaml-0-2_0.2.2-1_arm64.deb ... Unpacking libyaml-0-2:arm64 (0.2.2-1) ... Selecting previously unselected package lsb-release. Preparing to unpack .../49-lsb-release_11.1.0_all.deb ... Unpacking lsb-release (11.1.0) ... Selecting previously unselected package mercurial-common. Preparing to unpack .../50-mercurial-common_5.6.1-4_all.deb ... Unpacking mercurial-common (5.6.1-4) ... Selecting previously unselected package mercurial. Preparing to unpack .../51-mercurial_5.6.1-4_arm64.deb ... Unpacking mercurial (5.6.1-4) ... Selecting previously unselected package python3-all. Preparing to unpack .../52-python3-all_3.9.2-3_arm64.deb ... Unpacking python3-all (3.9.2-3) ... Selecting previously unselected package python3-six. Preparing to unpack .../53-python3-six_1.16.0-2_all.deb ... Unpacking python3-six (1.16.0-2) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../54-python3-dateutil_2.8.1-6_all.deb ... Unpacking python3-dateutil (2.8.1-6) ... Selecting previously unselected package python3-roman. Preparing to unpack .../55-python3-roman_2.0.0-5_all.deb ... Unpacking python3-roman (2.0.0-5) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../56-python3-docutils_0.16+dfsg-4_all.deb ... Unpacking python3-docutils (0.16+dfsg-4) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../57-python3-pyparsing_2.4.7-1_all.deb ... Unpacking python3-pyparsing (2.4.7-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../58-python3-pkg-resources_52.0.0-4_all.deb ... Unpacking python3-pkg-resources (52.0.0-4) ... Selecting previously unselected package python3-catkin-pkg. Preparing to unpack .../59-python3-catkin-pkg_0.4.23-1_all.deb ... Unpacking python3-catkin-pkg (0.4.23-1) ... Selecting previously unselected package python3-distro. Preparing to unpack .../60-python3-distro_1.5.0-1_all.deb ... Unpacking python3-distro (1.5.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../61-python3-setuptools_52.0.0-4_all.deb ... Unpacking python3-setuptools (52.0.0-4) ... Selecting previously unselected package python3-pbr. Preparing to unpack .../62-python3-pbr_5.5.0-2_all.deb ... Unpacking python3-pbr (5.5.0-2) ... Selecting previously unselected package python3-mock. Preparing to unpack .../63-python3-mock_4.0.3-1_all.deb ... Unpacking python3-mock (4.0.3-1) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../64-python3-yaml_5.3.1-5_arm64.deb ... Unpacking python3-yaml (5.3.1-5) ... Selecting previously unselected package python3-rospkg. Preparing to unpack .../65-python3-rospkg_1.2.9-1_all.deb ... Unpacking python3-rospkg (1.2.9-1) ... Selecting previously unselected package python3-rosdistro. Preparing to unpack .../66-python3-rosdistro_0.8.3-1_all.deb ... Unpacking python3-rosdistro (0.8.3-1) ... Selecting previously unselected package python3-vcstools. Preparing to unpack .../67-python3-vcstools_0.1.42-3_all.deb ... Unpacking python3-vcstools (0.1.42-3) ... Selecting previously unselected package python3-wstool. Preparing to unpack .../68-python3-wstool_0.1.18-2_all.deb ... Unpacking python3-wstool (0.1.18-2) ... Selecting previously unselected package zsh-common. Preparing to unpack .../69-zsh-common_5.8-6_all.deb ... Unpacking zsh-common (5.8-6) ... Selecting previously unselected package zsh. Preparing to unpack .../70-zsh_5.8-6+b2_arm64.deb ... Unpacking zsh (5.8-6+b2) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up libpsl5:arm64 (0.21.0-1.2) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up zsh-common (5.8-6) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:arm64 (0.2.2-1) ... Setting up distro-info-data (0.51) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:arm64 (1.0.9-2+b2) ... Setting up libnghttp2-14:arm64 (1.43.0-1) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libcap2:arm64 (1:2.44-1) ... Setting up libsasl2-modules-db:arm64 (2.1.27+dfsg-2.1) ... Setting up liberror-perl (0.17029-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libsasl2-2:arm64 (2.1.27+dfsg-2.1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libmpdec3:arm64 (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up git-man (1:2.30.2-1) ... Setting up libssh2-1:arm64 (1.9.0-2) ... Setting up sgml-base (1.30) ... Setting up zsh (5.8-6+b2) ... Setting up libelf1:arm64 (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libreadline8:arm64 (8.1-1) ... Setting up libldap-2.4-2:arm64 (2.4.57+dfsg-3) ... Setting up m4 (1.4.18-5) ... Setting up libcurl3-gnutls:arm64 (7.74.0-1.3+b1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ucf (3.0043) ... Setting up git (1:2.30.2-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up xml-core (0.18+nmu1) ... Setting up libpython3.9-stdlib:arm64 (3.9.2-1) ... Setting up libpython3-stdlib:arm64 (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-six (1.16.0-2) ... Setting up python3-roman (2.0.0-5) ... Setting up python3-pyparsing (2.4.7-1) ... Setting up python3-dateutil (2.8.1-6) ... Setting up lsb-release (11.1.0) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-pkg-resources (52.0.0-4) ... Setting up python3-distutils (3.9.2-1) ... Setting up dh-python (4.20201102+nmu1) ... Setting up python3-setuptools (52.0.0-4) ... Setting up python3-distro (1.5.0-1) ... Setting up mercurial-common (5.6.1-4) ... Setting up python3-pbr (5.5.0-2) ... Setting up python3-all (3.9.2-3) ... Setting up python3-yaml (5.3.1-5) ... Setting up python3-mock (4.0.3-1) ... Setting up python3-vcstools (0.1.42-3) ... Setting up mercurial (5.6.1-4) ... Creating config file /etc/mercurial/hgrc.d/hgext.rc with new version Setting up python3-wstool (0.1.18-2) ... Processing triggers for libc-bin (2.31-13) ... Processing triggers for sgml-base (1.30) ... Setting up docutils-common (0.16+dfsg-4) ... Processing triggers for sgml-base (1.30) ... Setting up python3-docutils (0.16+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up python3-catkin-pkg (0.4.23-1) ... Setting up python3-rospkg (1.2.9-1) ... Setting up python3-rosdistro (0.8.3-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/ros-rosinstall-0.7.8/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../ros-rosinstall_0.7.8-4_source.changes dpkg-buildpackage: info: source package ros-rosinstall dpkg-buildpackage: info: source version 0.7.8-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jochen Sprickerhof dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:232: python3.9 setup.py clean /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running clean removing '/build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build' (and everything under it) 'build/bdist.linux-arm64' does not exist -- can't clean it 'build/scripts-3.9' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:232: python3.9 setup.py config /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:232: /usr/bin/python3 setup.py build /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running build running build_py creating /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall running build_scripts creating build creating build/scripts-3.9 copying and adjusting scripts/rosinstall -> build/scripts-3.9 copying and adjusting scripts/roslocate -> build/scripts-3.9 copying and adjusting scripts/rosws -> build/scripts-3.9 copying and adjusting scripts/rosco -> build/scripts-3.9 changing mode of build/scripts-3.9/rosinstall from 644 to 755 changing mode of build/scripts-3.9/roslocate from 644 to 755 changing mode of build/scripts-3.9/rosws from 644 to 755 changing mode of build/scripts-3.9/rosco from 644 to 755 dh_auto_test -O--buildsystem=pybuild I: pybuild base:232: cd /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build; python3.9 -m unittest discover -v test_get_manifest_current (test.local.test_locate.LocateTest) ... ok test_get_manifest_groovy (test.local.test_locate.LocateTest) ... ok test_get_with_branches (test.local.test_locate.LocateTest) ... ok test_get_with_rosinstall (test.local.test_locate.LocateTest) ... ok test_getters (test.local.test_locate.LocateTest) ... ok test_getters_empty (test.local.test_locate.LocateTest) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout Warning: No specific branch data for branch "release" found, falling back on default checkout ok test_getters_invalid (test.local.test_locate.LocateTest) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpmki5q3sq/ros/.git/ [master (root-commit) 51f615b] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpmki5q3sq/gitrepo/.git/ [master (root-commit) 03b554c] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_cmd_generate_ros_files_build (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... Using ROS_ROOT: /tmp/tmpmki5q3sq/local.rosinstall Writing /tmp/tmpmki5q3sq/ws2b/.rosinstall Cloning into '/tmp/tmpmki5q3sq/ws2b/ros_comm'... done. Cloning into '/tmp/tmpmki5q3sq/ws2b/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved ok test_cmd_generate_ros_files_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_simple (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_vcs (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_init (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros_comm] Fetching /tmp/tmpmki5q3sq/gitrepo (version None) to /tmp/tmpmki5q3sq/ws2b/ros_comm [ros_comm] Done. [ros] Fetching /tmp/tmpmki5q3sq/ros (version None) to /tmp/tmpmki5q3sq/ws2b/ros [ros] Done. [hgrepo] Fetching /tmp/tmpmki5q3sq/hgrepo (version None) to /tmp/tmpmki5q3sq/ws2b/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws2b rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws2b/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws2 Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws5/.rosinstall :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_cmd_init_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws5 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws5/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Merge caused no change, no new elements found Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws6/.rosinstall ok test_cmd_init_catkin2 (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws7/.rosinstall ok test_cmd_init_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws8/.rosinstall ok test_cmd_init_main (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. rosws is a command to manipulate ROS workspaces. rosws replaces its predecessor rosinstall. Official usage: rosws CMD [ARGS] [OPTIONS] rosws will try to infer install path from context Type 'rosws help' for usage. help provide help for commands init set up a directory as workspace set add or changes one entry from your workspace config merge merges your workspace with another config set remove (rm) remove an entry from your workspace config, without deleting files scrape interactively add all found unmanaged VCS subfolders to workspace update (up) update or check out some of your config elements info Overview of some entries export export a snapshot of the workspace status (st) print the change status of files in some SCM controlled entries diff (di) print a diff over some SCM controlled entries foreach run shell command in given entries regenerate create ROS workspace specific setup files Writing /tmp/tmpmki5q3sq/ws11/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws11 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws11/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells workspace: /tmp/tmpmki5q3sq/ws11 ROS_ROOT: None workspace: /tmp/tmpmki5q3sq/ws11 ROS_ROOT: None workspace: /tmp/tmpmki5q3sq/ws11 ROS_ROOT: None ok test_cmd_init_makedir (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws9/.rosinstall ok test_cmd_init_no_ros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws9 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws9/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpmki5q3sq/ws10/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws10 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpmki5q3sq/ws10/.rosinstall ok test_cmd_remove (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws10 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpmki5q3sq/ros Writing /tmp/tmpmki5q3sq/ws12/.rosinstall ok test_init_parallel (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws12 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws12/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Performing actions: Add new elements: /tmp/tmpmki5q3sq/gitrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpmki5q3sq/ws12/.rosinstall update complete. Performing actions: Add new elements: /tmp/tmpmki5q3sq/hgrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpmki5q3sq/ws12/.rosinstall update complete. Overwriting /tmp/tmpmki5q3sq/ws12/.rosinstall Removed entries ['/tmp/tmpmki5q3sq/gitrepo'] Using ROS_ROOT: /tmp/tmpmki5q3sq/simple.rosinstall Writing /tmp/tmpmki5q3sq/ws13a/.rosinstall Cloning into '/tmp/tmpmki5q3sq/ws13a/ros'... Cloning into '/tmp/tmpmki5q3sq/ws13a/gitrepo'... done. done. [ros] Fetching /tmp/tmpmki5q3sq/ros (version None) to /tmp/tmpmki5q3sq/ws13a/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmki5q3sq/gitrepo (version None) to /tmp/tmpmki5q3sq/ws13a/gitrepo [gitrepo] Done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros,gitrepo] still active (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws13a rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws13a/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpmki5q3sq/simple.rosinstall Writing /tmp/tmpmki5q3sq/ws13/.rosinstall Cloning into '/tmp/tmpmki5q3sq/ws13/ros'... done. Cloning into '/tmp/tmpmki5q3sq/ws13/gitrepo'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh_relother (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros] Fetching /tmp/tmpmki5q3sq/ros (version None) to /tmp/tmpmki5q3sq/ws13/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmki5q3sq/gitrepo (version None) to /tmp/tmpmki5q3sq/ws13/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws13 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws13/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpmki5q3sq/simple_rel2.rosinstall Writing /tmp/tmpmki5q3sq/ws15/.rosinstall Cloning into '/tmp/tmpmki5q3sq/ws15/ros'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh_relros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros] Fetching /tmp/tmpmki5q3sq/ros (version None) to /tmp/tmpmki5q3sq/ws15/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws15 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws15/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpmki5q3sq/simple_rel.rosinstall Writing /tmp/tmpmki5q3sq/ws14/.rosinstall Cloning into '/tmp/tmpmki5q3sq/ws14/ros'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmple274sjt/ros/.git/ [master (root-commit) d6d161e] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmple274sjt/gitrepo/.git/ [master (root-commit) 856abd8] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_require_bootstrap (test.local.test_ros_cli.RosinstallCommandlineTest) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpl4vdkszt/ros/.git/ [master (root-commit) 82b55bf] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpl4vdkszt/gitrepo/.git/ [master (root-commit) 2fceef7] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder (test.local.test_rosinstall.RosinstallCommandlineOverlays) Use a folder as a remote rosinstall location ... [ros] Fetching /tmp/tmpmki5q3sq/ros (version None) to /tmp/tmpmki5q3sq/ws14/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmki5q3sq/ws14 rosinstall update complete. Type 'source /tmp/tmpmki5q3sq/ws14/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpalh16bfg from specifications in rosinstall files /tmp/tmpl4vdkszt/simple.rosinstall (Over-)Writing /tmp/tmpalh16bfg/.rosinstall Cloning into '/tmp/tmpalh16bfg/ros'... done. Cloning into '/tmp/tmpalh16bfg/gitrepo'... done. [ros] Fetching /tmp/tmpl4vdkszt/ros (version None) to /tmp/tmpalh16bfg/ros [ros] Done. [gitrepo] Fetching /tmp/tmpl4vdkszt/gitrepo (version None) to /tmp/tmpalh16bfg/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpalh16bfg rosinstall update complete. Now, type 'source /tmp/tmpalh16bfg/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmppyu6140y from specifications in rosinstall files /tmp/tmpalh16bfg (Over-)Writing /tmp/tmppyu6140y/.rosinstall ok test_Rosinstall_rosinstall_file_input (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base rosinstall with ros and git repo ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmppyu6140y rosinstall update complete. Now, type 'source /tmp/tmppyu6140y/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp6yrg_jj5 from specifications in rosinstall files /tmp/tmpl4vdkszt/simple.rosinstall (Over-)Writing /tmp/tmp6yrg_jj5/.rosinstall Cloning into '/tmp/tmp6yrg_jj5/ros'... done. Cloning into '/tmp/tmp6yrg_jj5/gitrepo'... done. [ros] Fetching /tmp/tmpl4vdkszt/ros (version None) to /tmp/tmp6yrg_jj5/ros [ros] Done. [gitrepo] Fetching /tmp/tmpl4vdkszt/gitrepo (version None) to /tmp/tmp6yrg_jj5/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp6yrg_jj5 rosinstall update complete. Now, type 'source /tmp/tmp6yrg_jj5/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmppdtj_0pc from specifications in rosinstall files /tmp/tmp6yrg_jj5 (Over-)Writing /tmp/tmppdtj_0pc/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:68: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_add (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base ros folders and adds a stack ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmppdtj_0pc rosinstall update complete. Now, type 'source /tmp/tmppdtj_0pc/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp9d03rxx5 from specifications in rosinstall files /tmp/tmpl4vdkszt/simple.rosinstall (Over-)Writing /tmp/tmp9d03rxx5/.rosinstall Cloning into '/tmp/tmp9d03rxx5/ros'... done. Cloning into '/tmp/tmp9d03rxx5/gitrepo'... done. [ros] Fetching /tmp/tmpl4vdkszt/ros (version None) to /tmp/tmp9d03rxx5/ros [ros] Done. [gitrepo] Fetching /tmp/tmpl4vdkszt/gitrepo (version None) to /tmp/tmp9d03rxx5/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9d03rxx5 rosinstall update complete. Now, type 'source /tmp/tmp9d03rxx5/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmp9d03rxx5 containing file .rosinstall rosinstall operating on /tmp/tmp87wooftc from specifications in rosinstall files /tmp/tmpl4vdkszt/ros, /tmp/tmpl4vdkszt/local2.rosinstall (Over-)Writing /tmp/tmp87wooftc/.rosinstall updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:101: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_ros_only (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base ros folder ... [gitrepo] Fetching /tmp/tmpl4vdkszt/hgrepo (version None) to /tmp/tmp87wooftc/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp87wooftc rosinstall update complete. Now, type 'source /tmp/tmp87wooftc/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp665aheg0 from specifications in rosinstall files /tmp/tmpl4vdkszt/simple.rosinstall (Over-)Writing /tmp/tmp665aheg0/.rosinstall Cloning into '/tmp/tmp665aheg0/ros'... done. Cloning into '/tmp/tmp665aheg0/gitrepo'... done. [ros] Fetching /tmp/tmpl4vdkszt/ros (version None) to /tmp/tmp665aheg0/ros [ros] Done. [gitrepo] Fetching /tmp/tmpl4vdkszt/gitrepo (version None) to /tmp/tmp665aheg0/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp665aheg0 rosinstall update complete. Now, type 'source /tmp/tmp665aheg0/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmp665aheg0 containing file .rosinstall rosinstall operating on /tmp/tmpm1meyxw_ from specifications in rosinstall files /tmp/tmpl4vdkszt/ros, /tmp/tmpl4vdkszt/local.rosinstall (Over-)Writing /tmp/tmpm1meyxw_/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:84: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmphfkk83gg/ros/.git/ [master (root-commit) e444e41] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmphfkk83gg/gitrepo/.git/ [master (root-commit) 6a186be] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder_and_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpm1meyxw_ rosinstall update complete. Now, type 'source /tmp/tmpm1meyxw_/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpcbfo88sg from specifications in rosinstall files /tmp/tmphfkk83gg/simple_fuerte.rosinstall (Over-)Writing /tmp/tmpcbfo88sg/.rosinstall Cloning into '/tmp/tmpcbfo88sg/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmphfkk83gg/ros (version None) to /tmp/tmpcbfo88sg/ros [ros] Done. [hgrepo] Fetching /tmp/tmphfkk83gg/hgrepo (version None) to /tmp/tmpcbfo88sg/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpcbfo88sg rosinstall update complete. Now, type 'source /tmp/tmpcbfo88sg/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmps3v2rczt from specifications in rosinstall files /tmp/tmpcbfo88sg (Over-)Writing /tmp/tmps3v2rczt/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:157: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_with_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmps3v2rczt rosinstall update complete. Now, type 'source /tmp/tmps3v2rczt/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp3z4krdce from specifications in rosinstall files /tmp/tmphfkk83gg/simple_fuerte.rosinstall (Over-)Writing /tmp/tmp3z4krdce/.rosinstall Cloning into '/tmp/tmp3z4krdce/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmphfkk83gg/ros (version None) to /tmp/tmp3z4krdce/ros [ros] Done. [hgrepo] Fetching /tmp/tmphfkk83gg/hgrepo (version None) to /tmp/tmp3z4krdce/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp3z4krdce rosinstall update complete. Now, type 'source /tmp/tmp3z4krdce/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmp3z4krdce containing file .rosinstall rosinstall operating on /tmp/tmpiluy5fep from specifications in rosinstall files /tmp/tmphfkk83gg/ros, /tmp/tmphfkk83gg/local.rosinstall (Over-)Writing /tmp/tmpiluy5fep/.rosinstall updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:146: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_prereq (test.local.test_rosinstall.RosinstallLocalDistro) ... ok test_get_ros_package_path (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_get_ros_stack_path (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_path_ros (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_path_stack (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_ros_in_setupfile (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpmvh42xt8/ros/.git/ [master (root-commit) ec81af2] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpmvh42xt8/gitrepo/.git/ [master (root-commit) c846e69] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_info_only (test.local.test_rosws.RosWsTest) ... [hgrepo] Fetching /tmp/tmphfkk83gg/hgrepo (version None) to /tmp/tmpiluy5fep/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpiluy5fep rosinstall update complete. Now, type 'source /tmp/tmpiluy5fep/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpmvh42xt8/simple.rosinstall Writing /tmp/tmpmvh42xt8/ws7/.rosinstall Cloning into '/tmp/tmpmvh42xt8/ws7/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws7/gitrepo'... done. ok test_init (test.local.test_rosws.RosWsTest) ... Usage: rosws init [TARGET_PATH [SOURCE_PATH]]? python3.9 -m unittest: error: Too many arguments Cloning into '/tmp/tmpmvh42xt8/ws1/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws1/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_init_parallel (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws1d/gitrepo'... done. Cloning into '/tmp/tmpmvh42xt8/ws1d/ros'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_init_pwd (test.local.test_rosws.RosWsTest) ... [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_merge (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws2/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws2/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_remove (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws3/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws3/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_plain (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws5/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws5/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws6/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws6/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells pulling from /tmp/tmpmvh42xt8/hgrepo searching for changes no changes found 0 files updated, 0 files merged, 1 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells pulling from /tmp/tmpmvh42xt8/hgrepo searching for changes no changes found 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm_change_localname (test.local.test_rosws.RosWsTest) ... [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Usage: rosws set [localname] [[SCM-URI] --(detached|svn|hg|git|bzr) [--version=VERSION]?]? python3.9 -m unittest: error: Cannot decide which one you want to add: /tmp/tmpmvh42xt8/gitrepo /tmp/tmpmvh42xt8/ws8/gitrepo ok test_set_detached (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmpmvh42xt8/ws4/ros'... done. Cloning into '/tmp/tmpmvh42xt8/ws4/gitrepo'... done. [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpkr9dcnks/ros/.git/ [master (root-commit) 46efb52] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpkr9dcnks/gitrepo/.git/ [master (root-commit) bb19066] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_gen_setup (test.local.test_setupfiles.GenerateTest) ... ok test_gen_setup_bash (test.local.test_setupfiles.GenerateTest) ... ok test_gen_setupsh (test.local.test_setupfiles.GenerateTest) ... ok test_source_setup_sh (test.local.test_setupfiles.GenerateTest) ... There is no file at /tmp/tmpkr9dcnks/workspacetest/.rosinstall Could not parse .rosinstall file warn: no such file : ERROR basename: missing operand Try 'basename --help' for more information. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 3570 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_source_setup_sh_chain (test.local.test_setupfiles.GenerateTest) Tests chaining of workspaces, which is fragile because ... :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 3595 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 3715 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_gen_python_code (test.local.test_setupfiles.Genfiletest) ... ok test_gen_python_code_python3 (test.local.test_setupfiles.Genfiletest) ... ok ---------------------------------------------------------------------- Ran 54 tests in 100.562s OK [ros] Fetching /tmp/tmpmvh42xt8/ros (version None) to /tmp/tmpmvh42xt8/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpmvh42xt8/gitrepo (version None) to /tmp/tmpmvh42xt8/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmvh42xt8/ws7 rosinstall update complete. Type 'source /tmp/tmpmvh42xt8/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install -O--buildsystem=pybuild I: pybuild base:232: /usr/bin/python3 setup.py install --root /build/ros-rosinstall-0.7.8/debian/python3-rosinstall /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running install running build running build_py running build_scripts running install_lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9 creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosinstall_cli.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/helpers.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/__version__.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/setupfiles.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosinstall_cmd.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosws_cli.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/locate.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/__init__.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__init__.py to __init__.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__version__.py to __version__.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/distro_locate.py to distro_locate.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/helpers.py to helpers.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/locate.py to locate.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosinstall_cli.py to rosinstall_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosinstall_cmd.py to rosinstall_cmd.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosws_stacks_cli.py to rosws_stacks_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/simple_checkout.py to simple_checkout.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosws_cli.py to rosws_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/setupfiles.py to setupfiles.cpython-39.pyc running install_egg_info running egg_info creating src/rosinstall.egg-info writing src/rosinstall.egg-info/PKG-INFO writing dependency_links to src/rosinstall.egg-info/dependency_links.txt writing requirements to src/rosinstall.egg-info/requires.txt writing top-level names to src/rosinstall.egg-info/top_level.txt writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' reading manifest file 'src/rosinstall.egg-info/SOURCES.txt' writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' Copying src/rosinstall.egg-info to /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall-0.7.8.egg-info Skipping SOURCES.txt running install_scripts creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosco -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosws -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/roslocate -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosinstall -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosco to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosws to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/roslocate to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosinstall to 755 dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installinit -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'python3-rosinstall' in '../python3-rosinstall_0.7.8-4_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ros-rosinstall_0.7.8-4_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/17880 and its subdirectories I: Current time: Tue Aug 17 15:42:34 -12 2021 I: pbuilder-time-stamp: 1629258154 Wed Aug 18 03:42:36 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink13-arm64.debian.net. Wed Aug 18 03:42:36 UTC 2021 I: Preparing to do remote build '2' on codethink13-arm64.debian.net. Wed Aug 18 03:44:47 UTC 2021 I: Deleting $TMPDIR on codethink13-arm64.debian.net. Wed Aug 18 03:44:48 UTC 2021 I: ros-rosinstall_0.7.8-4_arm64.changes: Format: 1.8 Date: Sat, 28 Sep 2019 08:38:20 +0200 Source: ros-rosinstall Binary: python3-rosinstall Architecture: all Version: 0.7.8-4 Distribution: unstable Urgency: medium Maintainer: Debian Science Maintainers Changed-By: Jochen Sprickerhof Description: python3-rosinstall - Installer for Robot OS (Python 3) Changes: ros-rosinstall (0.7.8-4) unstable; urgency=medium . * Add Python 3 patches Checksums-Sha1: 1780151c88a2994f2781b19253f31572178f9435 27468 python3-rosinstall_0.7.8-4_all.deb d6d427846ade84b7f3947a905a4cbc9a2c1b92f4 6466 ros-rosinstall_0.7.8-4_arm64.buildinfo Checksums-Sha256: 44710b6056e9c5127e1e1b26f66a7ee50cf027077d473161f964b0bb2d904d55 27468 python3-rosinstall_0.7.8-4_all.deb 55b06919e7933eed732e5e4378dd535123a69a65f9d33286c2a82f91dff69360 6466 ros-rosinstall_0.7.8-4_arm64.buildinfo Files: 4f573c4d9f8ac03eb8374c54f73e3f7a 27468 python optional python3-rosinstall_0.7.8-4_all.deb dab4612e4d1b88bf18979e766a718642 6466 python optional ros-rosinstall_0.7.8-4_arm64.buildinfo Wed Aug 18 03:44:49 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/ros-rosinstall_0.7.8-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/ros-rosinstall_0.7.8-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/ros-rosinstall_0.7.8-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/b1/ros-rosinstall_0.7.8-4_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.2SIrO90JYn/b2/ros-rosinstall_0.7.8-4_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.245s) 0.245s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Wed Aug 18 03:44:50 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Wed Aug 18 03:44:50 UTC 2021 I: ros-rosinstall from bullseye built successfully and reproducibly on arm64. Wed Aug 18 03:44:51 UTC 2021 I: Submitting .buildinfo files to external archives: Wed Aug 18 03:44:51 UTC 2021 I: Submitting 8.0K b1/ros-rosinstall_0.7.8-4_arm64.buildinfo.asc Wed Aug 18 03:44:53 UTC 2021 I: Submitting 8.0K b2/ros-rosinstall_0.7.8-4_arm64.buildinfo.asc Wed Aug 18 03:44:54 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Aug 18 03:44:54 UTC 2021 I: Done submitting .buildinfo files. Wed Aug 18 03:44:54 UTC 2021 I: Removing signed ros-rosinstall_0.7.8-4_arm64.buildinfo.asc files: removed './b1/ros-rosinstall_0.7.8-4_arm64.buildinfo.asc' removed './b2/ros-rosinstall_0.7.8-4_arm64.buildinfo.asc'