Wed Jul 28 01:59:36 UTC 2021 I: starting to build xfsdump/bullseye/armhf on jenkins on '2021-07-28 01:59' Wed Jul 28 01:59:36 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_17/3960/console.log Wed Jul 28 01:59:36 UTC 2021 I: Downloading source for bullseye/xfsdump=3.1.9+0 --2021-07-28 01:59:36-- http://cdn-fastly.deb.debian.org/debian/pool/main/x/xfsdump/xfsdump_3.1.9+0.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1592 (1.6K) Saving to: ‘xfsdump_3.1.9+0.dsc’ 0K . 100% 89.8M=0s 2021-07-28 01:59:36 (89.8 MB/s) - ‘xfsdump_3.1.9+0.dsc’ saved [1592/1592] Wed Jul 28 01:59:36 UTC 2021 I: xfsdump_3.1.9+0.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.0 Source: xfsdump Binary: xfsdump Architecture: any Version: 3.1.9+0 Maintainer: Nathan Scott Uploaders: Anibal Monsalve Salazar Homepage: http://oss.sgi.com/projects/xfs/ Standards-Version: 3.8.1 Build-Depends: xfslibs-dev (>= 3.0.0), uuid-dev, libattr1-dev (>= 2.4.14), libncurses-dev, autoconf, debhelper (>= 5), gettext, libtool, autotools-dev Package-List: xfsdump deb admin optional arch=any Checksums-Sha1: 5eed34027a6483a2f0219ffb2d3a27043f75ebe9 861111 xfsdump_3.1.9+0.tar.gz Checksums-Sha256: 71ec4d809e0ac7da54039541be7192494ee0a25d5076093329fa64c4d743ca58 861111 xfsdump_3.1.9+0.tar.gz Files: 0a9bf284f9e99941886ebf071a807439 861111 xfsdump_3.1.9+0.tar.gz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBCAAGBQJfCRI8AAoJEHxWrP6UeJfYiUcQAMEmob5TRGWbLw4rTVNNxfyn 6Zw4Qb3Gbu9HeHScIFHiZ4cFn473j5DmFuG1O9vt2K7QOfEWZN1/kHDQh+6ri11d x9u56L/8mUBGDJdpacfe71X8XNAt+evkqL0pgVi+JLr8MMLxnI2eDkeoTXGA39Vf 7nvXxVgk4NsviKGADY2foInPmQFrFNiF7tYXbOvd9Qy0OXYx/KC+ij/FMGaSKLXY zCxdrJdXFDCaiv77wGuTZsqLGcQJqEPLovWnb5qyE2lhOfGCy8wL8lewXysM2Lba d2h+d3LLN+DylLgJVEQwmLQZPA7rOEQaXSZXyx+HYcIZi36uGl6rjPbaaXYrb9t1 jogPO5P4vDEpUZ7kUUdPkvjm/vQyBsTtCmGZI0WcHVgl+g78k1cP66yRLLHn6M5q QrNPSX0yoAMJlYf/ji/FsiKn3MvKaSPrSmk5o6FCbCyxhA9Er1oGZFzFHavA3vBI HNWdja/VIFHJwU3UHCgH8Ahp5OoCRBRM7I28+CIwjVM8dgBsZrNnuIuCBg2MnJg3 28glXev9xxhfV+9fqNCTK7/xcHygx59kDUctoZf6PNNdnomkiMQDiGllfqcaRx8w 6MnZvvmv8CtCBQ5GihO1fyYBJBnWNikDrZpWkOmeq36KjrP8j5+eJ8s5V2zQWnfP Eoex6DYYgTDX1egklFMC =4bOJ -----END PGP SIGNATURE----- Wed Jul 28 01:59:36 UTC 2021 I: Checking whether the package is not for us Wed Jul 28 01:59:36 UTC 2021 I: Starting 1st build on remote node virt32b-armhf-rb.debian.net. Wed Jul 28 01:59:36 UTC 2021 I: Preparing to do remote build '1' on virt32b-armhf-rb.debian.net. Wed Jul 28 02:02:27 UTC 2021 I: Deleting $TMPDIR on virt32b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jul 27 13:59:43 -12 2021 I: pbuilder-time-stamp: 1627437583 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [xfsdump_3.1.9+0.dsc] I: copying [./xfsdump_3.1.9+0.tar.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.Fg5ArX4b/trustedkeys.kbx': General error gpgv: Signature made Fri Jul 10 13:13:32 2020 -12 gpgv: using RSA key 7C56ACFE947897D8 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./xfsdump_3.1.9+0.dsc dpkg-source: info: extracting xfsdump in xfsdump-3.1.9+0 dpkg-source: info: unpacking xfsdump_3.1.9+0.tar.gz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/7877/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='50c1832cf000463aa6540dacd1a0e8cc' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='7877' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/pbuilderrc_reoq --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/b1 --logfile b1/build.log xfsdump_3.1.9+0.dsc' SUDO_GID='112' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux virt32b 5.10.0-8-armmp-lpae #1 SMP Debian 5.10.46-2 (2021-07-20) armv7l GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 21 14:26 bash -rwxr-xr-x 3 root root 26052 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 22 2020 cat -rwxr-xr-x 1 root root 43104 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 22 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 22 2020 chown -rwxr-xr-x 1 root root 92616 Sep 22 2020 cp -rwxr-xr-x 1 root root 75524 Dec 10 2020 dash -rwxr-xr-x 1 root root 75880 Sep 22 2020 date -rwxr-xr-x 1 root root 55436 Sep 22 2020 dd -rwxr-xr-x 1 root root 59912 Sep 22 2020 df -rwxr-xr-x 1 root root 96764 Sep 22 2020 dir -rwxr-xr-x 1 root root 55012 Feb 7 02:38 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 7 02:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 26 04:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 2 11:30 gzip -rwxr-xr-x 1 root root 13784 Nov 6 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 22 2020 ln -rwxr-xr-x 1 root root 35068 Feb 7 2020 login -rwxr-xr-x 1 root root 96764 Sep 22 2020 ls -rwxr-xr-x 1 root root 99940 Feb 7 02:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 22 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 7 02:38 more -rwsr-xr-x 1 root root 34400 Feb 7 02:38 mount -rwxr-xr-x 1 root root 9824 Feb 7 02:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 22 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 22 2020 rm -rwxr-xr-x 1 root root 30732 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Jul 24 21:26 sh -> dash -rwxr-xr-x 1 root root 22532 Sep 22 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 22 2020 stty -rwsr-xr-x 1 root root 46704 Feb 7 02:38 su -rwxr-xr-x 1 root root 22532 Sep 22 2020 sync -rwxr-xr-x 1 root root 340872 Feb 16 21:55 tar -rwxr-xr-x 1 root root 9808 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 22 2020 touch -rwxr-xr-x 1 root root 22496 Sep 22 2020 true -rwxr-xr-x 1 root root 9636 Feb 26 04:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 7 02:38 umount -rwxr-xr-x 1 root root 22520 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 22 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 7 02:38 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat -rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff -rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep -rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce -rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless -rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore -rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew I: user script /srv/workspace/pbuilder/7877/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: xfslibs-dev (>= 3.0.0), uuid-dev, libattr1-dev (>= 2.4.14), libncurses-dev, autoconf, debhelper (>= 5), gettext, libtool, autotools-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on xfslibs-dev (>= 3.0.0); however: Package xfslibs-dev is not installed. pbuilder-satisfydepends-dummy depends on uuid-dev; however: Package uuid-dev is not installed. pbuilder-satisfydepends-dummy depends on libattr1-dev (>= 2.4.14); however: Package libattr1-dev is not installed. pbuilder-satisfydepends-dummy depends on libncurses-dev; however: Package libncurses-dev is not installed. pbuilder-satisfydepends-dummy depends on autoconf; however: Package autoconf is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 5); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on gettext; however: Package gettext is not installed. pbuilder-satisfydepends-dummy depends on libtool; however: Package libtool is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dmsetup{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libattr1-dev{a} libbsd0{a} libdebhelper-perl{a} libdevmapper1.02.1{a} libedit2{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libinih1{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libmpdec3{a} libncurses-dev{a} libncurses6{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} media-types{a} po-debconf{a} python3{a} python3-minimal{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} uuid-dev{a} xfslibs-dev{a} xfsprogs{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 55 newly installed, 0 to remove and 0 not upgraded. Need to get 24.7 MB of archives. After unpacking 87.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf libpython3.9-minimal armhf 3.9.2-1 [790 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf python3.9-minimal armhf 3.9.2-1 [1630 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf python3-minimal armhf 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libmpdec3 armhf 2.5.1-1 [74.9 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf libreadline8 armhf 8.1-1 [147 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf libpython3.9-stdlib armhf 3.9.2-1 [1608 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf python3.9 armhf 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf libpython3-stdlib armhf 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf python3 armhf 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf libdevmapper1.02.1 armhf 2:1.02.175-2.1 [135 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf dmsetup armhf 2:1.02.175-2.1 [92.1 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf libattr1-dev armhf 1:2.4.48-6 [34.6 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf libmd0 armhf 1.0.3-3 [27.4 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf libbsd0 armhf 0.11.3-1 [103 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf libedit2 armhf 3.1-20191231-2+b1 [81.1 kB] Get: 50 http://deb.debian.org/debian bullseye/main armhf libinih1 armhf 53-1+b2 [6364 B] Get: 51 http://deb.debian.org/debian bullseye/main armhf libncurses6 armhf 6.2+20201114-2 [80.5 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libncurses-dev armhf 6.2+20201114-2 [308 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf uuid-dev armhf 2.36.1-7 [97.9 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf xfsprogs armhf 5.10.0-4 [896 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf xfslibs-dev armhf 5.10.0-4 [116 kB] Fetched 24.7 MB in 2s (10.7 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../1-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../3-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:armhf. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_armhf.deb ... Unpacking libpython3.9-minimal:armhf (3.9.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../6-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_armhf.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:armhf (3.9.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20265 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_armhf.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:armhf. Preparing to unpack .../2-libmpdec3_2.5.1-1_armhf.deb ... Unpacking libmpdec3:armhf (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../4-libreadline8_8.1-1_armhf.deb ... Unpacking libreadline8:armhf (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:armhf. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_armhf.deb ... Unpacking libpython3.9-stdlib:armhf (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_armhf.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20686 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_armhf.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../03-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../06-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../07-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../08-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../09-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../10-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../11-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../12-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../16-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../17-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../18-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../19-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../20-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../21-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../22-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../23-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../24-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../25-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../26-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libdevmapper1.02.1:armhf. Preparing to unpack .../27-libdevmapper1.02.1_2%3a1.02.175-2.1_armhf.deb ... Unpacking libdevmapper1.02.1:armhf (2:1.02.175-2.1) ... Selecting previously unselected package dmsetup. Preparing to unpack .../28-dmsetup_2%3a1.02.175-2.1_armhf.deb ... Unpacking dmsetup (2:1.02.175-2.1) ... Selecting previously unselected package libattr1-dev:armhf. Preparing to unpack .../29-libattr1-dev_1%3a2.4.48-6_armhf.deb ... Unpacking libattr1-dev:armhf (1:2.4.48-6) ... Selecting previously unselected package libmd0:armhf. Preparing to unpack .../30-libmd0_1.0.3-3_armhf.deb ... Unpacking libmd0:armhf (1.0.3-3) ... Selecting previously unselected package libbsd0:armhf. Preparing to unpack .../31-libbsd0_0.11.3-1_armhf.deb ... Unpacking libbsd0:armhf (0.11.3-1) ... Selecting previously unselected package libedit2:armhf. Preparing to unpack .../32-libedit2_3.1-20191231-2+b1_armhf.deb ... Unpacking libedit2:armhf (3.1-20191231-2+b1) ... Selecting previously unselected package libinih1:armhf. Preparing to unpack .../33-libinih1_53-1+b2_armhf.deb ... Unpacking libinih1:armhf (53-1+b2) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../34-libncurses6_6.2+20201114-2_armhf.deb ... Unpacking libncurses6:armhf (6.2+20201114-2) ... Selecting previously unselected package libncurses-dev:armhf. Preparing to unpack .../35-libncurses-dev_6.2+20201114-2_armhf.deb ... Unpacking libncurses-dev:armhf (6.2+20201114-2) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../36-uuid-dev_2.36.1-7_armhf.deb ... Unpacking uuid-dev:armhf (2.36.1-7) ... Selecting previously unselected package xfsprogs. Preparing to unpack .../37-xfsprogs_5.10.0-4_armhf.deb ... Unpacking xfsprogs (5.10.0-4) ... Selecting previously unselected package xfslibs-dev. Preparing to unpack .../38-xfslibs-dev_5.10.0-4_armhf.deb ... Unpacking xfslibs-dev (5.10.0-4) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libattr1-dev:armhf (1:2.4.48-6) ... Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libinih1:armhf (53-1+b2) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up uuid-dev:armhf (2.36.1-7) ... Setting up libncurses6:armhf (6.2+20201114-2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libmd0:armhf (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmpdec3:armhf (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libbsd0:armhf (0.11.3-1) ... Setting up libelf1:armhf (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libncurses-dev:armhf (6.2+20201114-2) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libedit2:armhf (3.1-20191231-2+b1) ... Setting up libreadline8:armhf (8.1-1) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libpython3.9-stdlib:armhf (3.9.2-1) ... Setting up libpython3-stdlib:armhf (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up libdevmapper1.02.1:armhf (2:1.02.175-2.1) ... Setting up dmsetup (2:1.02.175-2.1) ... Setting up xfsprogs (5.10.0-4) ... Setting up xfslibs-dev (5.10.0-4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/xfsdump-3.1.9+0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../xfsdump_3.1.9+0_source.changes dpkg-buildpackage: info: source package xfsdump dpkg-buildpackage: info: source version 3.1.9+0 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Anibal Monsalve Salazar dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean == dpkg-buildpackage: clean test -f debian/rules rm -f built .census /usr/bin/make distclean make[1]: Entering directory '/build/xfsdump-3.1.9+0' rm -f config.log .ltdep .dep config.status config.cache confdefs.h conftest* built .census install.* install-dev.* *.gz autom4te.cache/* libtool include/builddefs include/config.h make[1]: Leaving directory '/build/xfsdump-3.1.9+0' rm -rf debian/xfsdump rm -f debian/*substvars debian/files* debian/*.debhelper dh_autotools-dev_restoreconfig dh_autotools-dev_restoreconfig: warning: Compatibility levels before 10 are deprecated (level 5 in use) dh_autotools-dev_restoreconfig: warning: dh_autotools-dev_restoreconfig is deprecated; please see dh_autotools-dev_restoreconfig(1) for a replacement dh_autotools-dev_restoreconfig: warning: This feature will be removed in compat 12. for c_g in `find . -type f -name config.guess` ; do if test -e "$c_g.dh-orig" ; then mv -f "$c_g.dh-orig" "$c_g" ; fi ; done for c_s in `find . -type f -name config.sub` ; do if test -e "$c_s.dh-orig" ; then mv -f "$c_s.dh-orig" "$c_s" ; fi ; done find . -type f \( -name config.guess.dh-orig -o -name config.sub.dh-orig \) -delete dh_clean rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ dh_clean: warning: Compatibility levels before 10 are deprecated (level 5 in use) rm -f debian/xfsdump.debhelper.log rm -f -- debian/xfsdump.substvars debian/files rm -fr -- debian/xfsdump/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \) debian/rules build == dpkg-buildpackage: configure test -f debian/rules dh_autotools-dev_updateconfig dh_autotools-dev_updateconfig: warning: Compatibility levels before 10 are deprecated (level 5 in use) dh_autotools-dev_updateconfig: warning: dh_autotools-dev_updateconfig is deprecated; please see dh_autotools-dev_updateconfig(1) for a replacement dh_autotools-dev_updateconfig: warning: This feature will be removed in compat 12. for c_g in `find -type f -name config.guess` ; do if ! test -e "$c_g.dh-orig" ; then mv -f "$c_g" "$c_g.dh-orig" ; cp -f /usr/share/misc/config.guess "$c_g" ; fi ; done for c_s in `find -type f -name config.sub` ; do if ! test -e "$c_s.dh-orig" ; then mv -f "$c_s" "$c_s.dh-orig" ; cp -f /usr/share/misc/config.sub "$c_s" ; fi ; done export DEBUG=-DNDEBUG DISTRIBUTION=debian INSTALL_USER=root INSTALL_GROUP=root ; /usr/bin/make include/config.h make[1]: Entering directory '/build/xfsdump-3.1.9+0' ./configure $LOCAL_CONFIGURE_OPTIONS checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking build system type... armv7l-unknown-linux-gnueabihf checking host system type... armv7l-unknown-linux-gnueabihf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert armv7l-unknown-linux-gnueabihf file names to armv7l-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert armv7l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... no checking for mawk... mawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking for gmake... /usr/bin/gmake checking for tar... /bin/tar checking for gzip... /bin/gzip checking whether gcc -MM is supported... yes checking for sort... /usr/bin/sort checking whether ln -s works... yes checking for msgfmt... /usr/bin/msgfmt checking for msgmerge... /usr/bin/msgmerge checking for xgettext... /usr/bin/xgettext checking for rpm... no checking uuid.h usability... no checking uuid.h presence... no checking for uuid.h... no checking sys/uuid.h usability... no checking sys/uuid.h presence... no checking for sys/uuid.h... no checking uuid/uuid.h usability... yes checking uuid/uuid.h presence... yes checking for uuid/uuid.h... yes checking for uuid_compare... no checking for uuid_compare in -luuid... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_mutex_init in -lpthread... yes checking ncurses.h usability... yes checking ncurses.h presence... yes checking for ncurses.h... yes checking for initscr in -lncurses... yes checking for bad glibc/ncurses header interaction... ok checking xfs/xfs.h usability... yes checking xfs/xfs.h presence... yes checking for xfs/xfs.h... yes checking xfs/handle.h usability... yes checking xfs/handle.h presence... yes checking for xfs/handle.h... yes checking for open_by_fshandle in -lhandle... yes checking attr/attributes.h usability... yes checking attr/attributes.h presence... yes checking for attr/attributes.h... yes checking sys/attributes.h usability... no checking sys/attributes.h presence... no checking for sys/attributes.h... no checking macros in attr/attributes.h... ok checking for attr_get in -lattr... yes checking for fallocate... yes configure: creating ./config.status config.status: creating include/builddefs config.status: creating include/config.h config.status: executing libtool commands make[1]: Leaving directory '/build/xfsdump-3.1.9+0' touch .census == dpkg-buildpackage: build /usr/bin/make default make[1]: Entering directory '/build/xfsdump-3.1.9+0' Building include Building librmt [LTDEP] [CC] isrmt.lo [CC] rmtclose.lo [CC] rmtdev.lo [CC] rmtisatty.lo [CC] rmtread.lo [CC] rmtabort.lo [CC] rmtcommand.lo [CC] rmtfstat.lo [CC] rmtlseek.lo [CC] rmtstatus.lo [CC] rmtaccess.lo [CC] rmtcreat.lo [CC] rmtioctl.lo [CC] rmtopen.lo [CC] rmtwrite.lo [CC] rmtmsg.lo [LD] librmt.la Building common Building inventory [LTDEP] gcc: fatal error: no input files compilation terminated. Building invutil [LN] global.h [LN] mlog.h [LN] timeutil.h [LN] types.h [LN] timeutil.c [LN] inventory.h [LN] inv_priv.h [LN] inv_files.c [DEP] [CC] timeutil.o [CC] inv_files.o [CC] invutil.o [CC] cmenu.o [CC] fstab.o fstab.c: In function 'fstab_highlight': fstab.c:167:41: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 248 [-Wformat-truncation=] 167 | snprintf(txt, sizeof(txt), "device: %s", fstabentry->ft_devpath); | ^~ fstab.c:167:5: note: 'snprintf' output between 9 and 264 bytes into a destination of size 256 167 | snprintf(txt, sizeof(txt), "device: %s", fstabentry->ft_devpath); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] invidx.o invidx.c: In function 'invidx_highlight': invidx.c:705:40: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 249 [-Wformat-truncation=] 705 | snprintf(txt, sizeof(txt), "path: %s", invtentry->ie_filename); | ^~ invidx.c:705:5: note: 'snprintf' output between 8 and 263 bytes into a destination of size 256 705 | snprintf(txt, sizeof(txt), "path: %s", invtentry->ie_filename); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ invidx.c: In function 'invidx_commit': invidx.c:253:37: warning: '%s' directive output may be truncated writing up to 4095 bytes into a region of size 1020 [-Wformat-truncation=] 253 | snprintf(cmd, sizeof(cmd), "cp %s %s", stobjfile, dst_stobjfile); | ^~ ~~~~~~~~~~~~~ invidx.c:253:3: note: 'snprintf' output 5 or more bytes (assuming 4100) into a destination of size 1024 253 | snprintf(cmd, sizeof(cmd), "cp %s %s", stobjfile, dst_stobjfile); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ invidx.c:323:40: warning: '%s' directive output may be truncated writing up to 4095 bytes into a region of size 1020 [-Wformat-truncation=] 323 | snprintf(cmd, sizeof(cmd), "cp %s %s", stobjfile, dst_stobjfile); | ^~ ~~~~~~~~~~~~~ invidx.c:323:6: note: 'snprintf' output 5 or more bytes (assuming 4100) into a destination of size 1024 323 | snprintf(cmd, sizeof(cmd), "cp %s %s", stobjfile, dst_stobjfile); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] list.o [CC] menu.o [CC] screen.o [CC] stobj.o stobj.c: In function 'stobjstrm_highlight': stobj.c:227:58: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 230 and 231 [-Wformat-truncation=] 227 | snprintf(txt, sizeof(txt), "interrupted: %s, cmdarg: %s", | ^~ stobj.c:227:5: note: 'snprintf' output between 26 and 282 bytes into a destination of size 256 227 | snprintf(txt, sizeof(txt), "interrupted: %s, cmdarg: %s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 228 | (stobjstrm->st_interrupted == BOOL_TRUE) ? "yes" : "no", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 229 | stobjstrm->st_cmdarg); | ~~~~~~~~~~~~~~~~~~~~~ stobj.c: In function 'stobjsess_highlight': stobj.c:199:42: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 247 [-Wformat-truncation=] 199 | snprintf(txt, sizeof(txt), "mountpt: %s, fsid: %s", stobjses->s_mountpt, uuidstr); | ^~ stobj.c:199:5: note: 'snprintf' output between 18 and 310 bytes into a destination of size 256 199 | snprintf(txt, sizeof(txt), "mountpt: %s, fsid: %s", stobjses->s_mountpt, uuidstr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ stobj.c:203:42: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size 247 [-Wformat-truncation=] 203 | snprintf(txt, sizeof(txt), "device: %s, sesid: %s", stobjses->s_devpath, uuidstr); | ^~ stobj.c:203:5: note: 'snprintf' output between 19 and 311 bytes into a destination of size 256 203 | snprintf(txt, sizeof(txt), "device: %s, sesid: %s", stobjses->s_devpath, uuidstr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [LD] xfsinvutil Building dump [LN] arch_xlate.h [LN] cldmgr.h [LN] content.h [LN] content_common.h [LN] content_inode.h [LN] dlog.h [LN] drive.h [LN] exit.h [LN] fs.h [LN] getdents.h [LN] global.h [LN] hsmapi.h [LN] lock.h [LN] media.h [LN] mlog.h [LN] openutil.h [LN] path.h [LN] qlock.h [LN] ring.h [LN] stream.h [LN] timeutil.h [LN] ts_mtio.h [LN] types.h [LN] util.h [LN] rec_hdr.h [LN] arch_xlate.c [LN] cldmgr.c [LN] content_common.c [LN] dlog.c [LN] drive.c [LN] drive_scsitape.c [LN] drive_simple.c [LN] drive_minrmt.c [LN] fs.c [LN] getdents.c [LN] global.c [LN] hsmapi.c [LN] lock.c [LN] main.c [LN] mlog.c [LN] openutil.c [LN] qlock.c [LN] path.c [LN] ring.c [LN] stream.c [LN] timeutil.c [LN] util.c [LN] inventory.h [LN] inv_priv.h [LN] inv_api.c [LN] inv_core.c [LN] inv_files.c [LN] inv_fstab.c [LN] inv_idx.c [LN] inv_mgr.c [LN] inv_stobj.c [DEP] [CC] arch_xlate.o [CC] cldmgr.o [CC] content_common.o [CC] dlog.o [CC] drive.o [CC] drive_scsitape.o drive_scsitape.c: In function 'do_return_read_buf': drive_scsitape.c:997:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 997 | size_t ownedcnt; | ^~~~~~~~ drive_scsitape.c: In function 'do_seek_mark': drive_scsitape.c:1346:13: warning: variable 'recoff' set but not used [-Wunused-but-set-variable] 1346 | uint32_t recoff; | ^~~~~~ [CC] drive_simple.o drive_simple.c: In function 'do_return_read_buf': drive_simple.c:686:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 686 | size_t ownedcnt; | ^~~~~~~~ drive_simple.c: In function 'do_set_mark': drive_simple.c:1062:9: warning: variable 'nwritten' set but not used [-Wunused-but-set-variable] 1062 | int nwritten; | ^~~~~~~~ [CC] drive_minrmt.o drive_minrmt.c: In function 'do_return_read_buf': drive_minrmt.c:884:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 884 | size_t ownedcnt; | ^~~~~~~~ drive_minrmt.c: In function 'do_seek_mark': drive_minrmt.c:1233:13: warning: variable 'recoff' set but not used [-Wunused-but-set-variable] 1233 | uint32_t recoff; | ^~~~~~ [CC] fs.o [CC] getdents.o [CC] global.o global.c: In function 'global_hdr_alloc': global.c:85:2: warning: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] 85 | strncpy(ghdrp->gh_magic, GLOBAL_HDR_MAGIC, GLOBAL_HDR_MAGIC_SZ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] hsmapi.o hsmapi.c: In function 'HsmBeginRestoreFile': hsmapi.c:802:3: warning: 'attr_setf' is deprecated: Use fsetxattr instead [-Wdeprecated-declarations] 802 | rv = attr_setf(fd, | ^~ In file included from hsmapi.c:28: /usr/include/attr/attributes.h:143:12: note: declared here 143 | extern int attr_setf (int __fd, const char *__attrname, | ^~~~~~~~~ hsmapi.c: In function 'HsmEndRestoreFile': hsmapi.c:874:3: warning: 'attr_removef' is deprecated: Use fremovexattr instead [-Wdeprecated-declarations] 874 | rv = attr_removef(fd, DMF_ATTR_NAME, ATTR_ROOT); | ^~ In file included from hsmapi.c:28: /usr/include/attr/attributes.h:155:12: note: declared here 155 | extern int attr_removef (int __fd, const char *__attrname, int __flags) | ^~~~~~~~~~~~ [CC] lock.o [CC] main.o main.c: In function 'main': main.c:166:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 166 | int rval; | ^~~~ main.c: In function 'set_rlimits': main.c:2053:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 2053 | int rval; | ^~~~ [CC] mlog.o mlog.c: In function 'mlog_get_hint': mlog.c:673:9: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 673 | bool_t ok; | ^~ mlog.c: In function 'mlog_exit_flush': mlog.c:731:11: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 731 | bool_t ok; | ^~ [CC] openutil.o [CC] qlock.o qlock.c: In function 'qlock_lock': qlock.c:107:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 107 | int rval; | ^~~~ qlock.c: In function 'qlock_unlock': qlock.c:150:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 150 | int rval; | ^~~~ qlock.c: In function 'qsem_alloc': qlock.c:170:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 170 | int rval; | ^~~~ qlock.c: In function 'qsem_free': qlock.c:189:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 189 | int rval; | ^~~~ qlock.c: In function 'qsemP': qlock.c:205:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 205 | int rval; | ^~~~ qlock.c: In function 'qsemV': qlock.c:217:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 217 | int rval; | ^~~~ qlock.c: In function 'qsemPwouldblock': qlock.c:230:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 230 | int rval; | ^~~~ qlock.c: In function 'qsemPavail': qlock.c:243:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 243 | int rval; | ^~~~ [CC] path.o [CC] ring.o ring.c: In function 'ring_create': ring.c:48:9: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 48 | bool_t ok; | ^~ [CC] stream.o [CC] timeutil.o [CC] util.o [CC] inv_api.o [CC] inv_core.o [CC] inv_files.o [CC] inv_fstab.o [CC] inv_idx.o [CC] inv_mgr.o [CC] inv_stobj.o [CC] content.o content.c: In function 'content_init': content.c:1032:10: warning: variable 'ok1' set but not used [-Wunused-but-set-variable] 1032 | bool_t ok1; | ^~~ content.c: In function 'create_inv_session': content.c:1926:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 1926 | int rval; | ^~~~ content.c: In function 'inv_cleanup': content.c:5498:9: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 5498 | bool_t ok; | ^~ content.c: In function 'Media_prompt_erase': content.c:6369:4: warning: 'sprintf' writing a terminating nul past the end of the destination [-Wformat-overflow=] 6369 | "pre-erase (-%c) option specified " | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ content.c:6372:15: note: format string is defined here 6372 | "drive %u\n", | ^ content.c:6368:2: note: 'sprintf' output between 101 and 110 bytes into a destination of size 100 6368 | sprintf(question, | ^~~~~~~~~~~~~~~~~ 6369 | "pre-erase (-%c) option specified " | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 6370 | "and non-blank media encountered:\n" | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 6371 | "please confirm media erase " | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 6372 | "drive %u\n", | ~~~~~~~~~~~~~ 6373 | GETOPT_ERASE, | ~~~~~~~~~~~~~ 6374 | (unsigned int)drivep->d_index); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] inomap.o [CC] var.o [LD] xfsdump Building restore [LN] arch_xlate.h [LN] cldmgr.h [LN] content.h [LN] content_inode.h [LN] dlog.h [LN] drive.h [LN] exit.h [LN] fs.h [LN] getdents.h [LN] global.h [LN] hsmapi.h [LN] lock.h [LN] media.h [LN] mlog.h [LN] openutil.h [LN] path.h [LN] qlock.h [LN] rec_hdr.h [LN] ring.h [LN] stream.h [LN] timeutil.h [LN] ts_mtio.h [LN] types.h [LN] util.h [LN] arch_xlate.c [LN] cldmgr.c [LN] dlog.c [LN] drive.c [LN] drive_scsitape.c [LN] drive_simple.c [LN] drive_minrmt.c [LN] fs.c [LN] getdents.c [LN] global.c [LN] hsmapi.c [LN] lock.c [LN] main.c [LN] mlog.c [LN] openutil.c [LN] path.c [LN] qlock.c [LN] ring.c [LN] stream.c [LN] timeutil.c [LN] util.c [LN] inventory.h [LN] inv_priv.h [LN] inv_api.c [LN] inv_core.c [LN] inv_files.c [LN] inv_fstab.c [LN] inv_idx.c [LN] inv_mgr.c [LN] inv_stobj.c [DEP] [CC] arch_xlate.o [CC] cldmgr.o [CC] dlog.o [CC] drive.o [CC] drive_scsitape.o drive_scsitape.c: In function 'do_return_read_buf': drive_scsitape.c:997:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 997 | size_t ownedcnt; | ^~~~~~~~ drive_scsitape.c: In function 'do_seek_mark': drive_scsitape.c:1346:13: warning: variable 'recoff' set but not used [-Wunused-but-set-variable] 1346 | uint32_t recoff; | ^~~~~~ [CC] drive_simple.o drive_simple.c: In function 'do_return_read_buf': drive_simple.c:686:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 686 | size_t ownedcnt; | ^~~~~~~~ drive_simple.c: In function 'do_set_mark': drive_simple.c:1062:9: warning: variable 'nwritten' set but not used [-Wunused-but-set-variable] 1062 | int nwritten; | ^~~~~~~~ [CC] drive_minrmt.o drive_minrmt.c: In function 'do_return_read_buf': drive_minrmt.c:884:9: warning: variable 'ownedcnt' set but not used [-Wunused-but-set-variable] 884 | size_t ownedcnt; | ^~~~~~~~ drive_minrmt.c: In function 'do_seek_mark': drive_minrmt.c:1233:13: warning: variable 'recoff' set but not used [-Wunused-but-set-variable] 1233 | uint32_t recoff; | ^~~~~~ [CC] fs.o [CC] getdents.o [CC] global.o global.c: In function 'global_hdr_alloc': global.c:85:2: warning: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] 85 | strncpy(ghdrp->gh_magic, GLOBAL_HDR_MAGIC, GLOBAL_HDR_MAGIC_SZ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] hsmapi.o hsmapi.c: In function 'HsmBeginRestoreFile': hsmapi.c:802:3: warning: 'attr_setf' is deprecated: Use fsetxattr instead [-Wdeprecated-declarations] 802 | rv = attr_setf(fd, | ^~ In file included from hsmapi.c:28: /usr/include/attr/attributes.h:143:12: note: declared here 143 | extern int attr_setf (int __fd, const char *__attrname, | ^~~~~~~~~ hsmapi.c: In function 'HsmEndRestoreFile': hsmapi.c:874:3: warning: 'attr_removef' is deprecated: Use fremovexattr instead [-Wdeprecated-declarations] 874 | rv = attr_removef(fd, DMF_ATTR_NAME, ATTR_ROOT); | ^~ In file included from hsmapi.c:28: /usr/include/attr/attributes.h:155:12: note: declared here 155 | extern int attr_removef (int __fd, const char *__attrname, int __flags) | ^~~~~~~~~~~~ [CC] lock.o [CC] main.o main.c: In function 'main': main.c:166:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 166 | int rval; | ^~~~ main.c: In function 'set_rlimits': main.c:2053:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 2053 | int rval; | ^~~~ [CC] mlog.o mlog.c: In function 'mlog_get_hint': mlog.c:673:9: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 673 | bool_t ok; | ^~ mlog.c: In function 'mlog_exit_flush': mlog.c:731:11: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 731 | bool_t ok; | ^~ [CC] openutil.o [CC] path.o [CC] qlock.o qlock.c: In function 'qlock_lock': qlock.c:107:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 107 | int rval; | ^~~~ qlock.c: In function 'qlock_unlock': qlock.c:150:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 150 | int rval; | ^~~~ qlock.c: In function 'qsem_alloc': qlock.c:170:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 170 | int rval; | ^~~~ qlock.c: In function 'qsem_free': qlock.c:189:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 189 | int rval; | ^~~~ qlock.c: In function 'qsemP': qlock.c:205:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 205 | int rval; | ^~~~ qlock.c: In function 'qsemV': qlock.c:217:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 217 | int rval; | ^~~~ qlock.c: In function 'qsemPwouldblock': qlock.c:230:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 230 | int rval; | ^~~~ qlock.c: In function 'qsemPavail': qlock.c:243:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 243 | int rval; | ^~~~ [CC] ring.o ring.c: In function 'ring_create': ring.c:48:9: warning: variable 'ok' set but not used [-Wunused-but-set-variable] 48 | bool_t ok; | ^~ [CC] stream.o [CC] timeutil.o [CC] util.o [CC] inv_api.o [CC] inv_core.o [CC] inv_files.o [CC] inv_fstab.o [CC] inv_idx.o [CC] inv_mgr.o [CC] inv_stobj.o [CC] bag.o [CC] content.o content.c: In function 'eatdirdump': content.c:3254:20: warning: variable 'namelen' set but not used [-Wunused-but-set-variable] 3254 | register size_t namelen; | ^~~~~~~ content.c: In function 'wipepersstate': content.c:3704:7: warning: variable 'len' set but not used [-Wunused-but-set-variable] 3704 | int len; | ^~~ content.c: In function 'pi_allocdesc': content.c:4932:7: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 4932 | int rval; | ^~~~ content.c: In function 'read_filehdr': content.c:8090:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8090 | int nread; | ^~~~~ content.c: In function 'read_extenthdr': content.c:8149:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8149 | int nread; | ^~~~~ content.c: In function 'read_dirent': content.c:8212:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8212 | int nread; | ^~~~~ content.c: In function 'read_extattrhdr': content.c:8334:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8334 | int nread; | ^~~~~ content.c: In function 'discard_padding': content.c:8406:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8406 | int nread; | ^~~~~ content.c: In function 'restore_extattr': content.c:8740:7: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 8740 | int nread; | ^~~~~ content.c: In function 'setextattr': content.c:8875:2: warning: 'attr_set' is deprecated: Use setxattr or lsetxattr instead [-Wdeprecated-declarations] 8875 | rval = attr_set(path, | ^~~~ In file included from content.c:27: /usr/include/attr/attributes.h:139:12: note: declared here 139 | extern int attr_set (const char *__path, const char *__attrname, | ^~~~~~~~ content.c: In function 'pi_show': content.c:9294:6: warning: variable 'strbuflen' set but not used [-Wunused-but-set-variable] 9294 | int strbuflen; | ^~~~~~~~~ content.c: In function 'pi_insertfile.constprop': content.c:5084:3: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] 5084 | strncpy(DH2O(objh)->o_lab, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ 5085 | medialabel, | ~~~~~~~~~~~ 5086 | sizeof(DH2O(objh)->o_lab)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~ content.c:5114:3: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] 5114 | strncpy(DH2O(prevobjh)->o_lab, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 5115 | prevmedialabel, | ~~~~~~~~~~~~~~~ 5116 | sizeof(DH2O(prevobjh)->o_lab)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [CC] dirattr.o dirattr.c: In function 'dirattr_cleanup': dirattr.c:336:6: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 336 | int rval; | ^~~~ [CC] inomap.o inomap.c: In function 'inomap_restore_pers': inomap.c:198:6: warning: variable 'rval1' set but not used [-Wunused-but-set-variable] 198 | int rval1; | ^~~~~ inomap.c:195:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 195 | int nread; | ^~~~~ inomap.c: In function 'inomap_discard': inomap.c:315:6: warning: variable 'nread' set but not used [-Wunused-but-set-variable] 315 | int nread; | ^~~~~ [CC] mmap.o [CC] namreg.o [CC] node.o [CC] tree.o tree.c: In function 'tree_addent': tree.c:878:8: warning: variable 'namebuflen' set but not used [-Wunused-but-set-variable] 878 | int namebuflen; | ^~~~~~~~~~ tree.c: In function 'noref_elim_recurse': tree.c:1385:12: warning: variable 'dummynrh' set but not used [-Wunused-but-set-variable] 1385 | nrh_t dummynrh; | ^~~~~~~~ tree.c:1399:12: warning: variable 'dummynrh' set but not used [-Wunused-but-set-variable] 1399 | nrh_t dummynrh; | ^~~~~~~~ tree.c:1503:12: warning: variable 'dummynrh' set but not used [-Wunused-but-set-variable] 1503 | nrh_t dummynrh; | ^~~~~~~~ tree.c:1517:12: warning: variable 'dummynrh' set but not used [-Wunused-but-set-variable] 1517 | nrh_t dummynrh; | ^~~~~~~~ tree.c:1537:11: warning: variable 'nrh' set but not used [-Wunused-but-set-variable] 1537 | nrh_t nrh; | ^~~ tree.c: In function 'rename_dirs': tree.c:1680:10: warning: variable 'dummynrh' set but not used [-Wunused-but-set-variable] 1680 | nrh_t dummynrh; | ^~~~~~~~ tree.c:1659:8: warning: variable 'parh' set but not used [-Wunused-but-set-variable] 1659 | nh_t parh; | ^~~~ tree.c: In function 'tsi_cmd_pwd_recurse': tree.c:2855:15: warning: variable 'namelen' set but not used [-Wunused-but-set-variable] 2855 | register int namelen; | ^~~~~~~ tree.c: In function 'tsi_cmd_ls': tree.c:2941:8: warning: variable 'namelen' set but not used [-Wunused-but-set-variable] 2941 | int namelen; | ^~~~~~~ tree.c: In function 'tsi_walkpath': tree.c:3355:8: warning: variable 'siblen' set but not used [-Wunused-but-set-variable] 3355 | int siblen; | ^~~~~~ tree.c: In function 'link_matchh': tree.c:3873:8: warning: variable 'namelen' set but not used [-Wunused-but-set-variable] 3873 | int namelen; | ^~~~~~~ [CC] win.o win.c: In function 'win_map': win.c:250:7: warning: variable 'rval' set but not used [-Wunused-but-set-variable] 250 | int rval; | ^~~~ [LD] xfsrestore Building m4 Building man Building man8 Building doc [ZIP] CHANGES.gz Building po [GETTXT] xfsdump.pot [MSGFMT] de.mo 763 translated messages. [MSGFMT] pl.mo 767 translated messages. Building debian make[1]: Leaving directory '/build/xfsdump-3.1.9+0' touch built fakeroot debian/rules binary test 0 -eq `id -u` == dpkg-buildpackage: build /usr/bin/make default make[1]: Entering directory '/build/xfsdump-3.1.9+0' Building include Building librmt Building common Building inventory Building invutil Building dump Building restore Building m4 Building man Building man8 Building doc Building po Building debian make[1]: Leaving directory '/build/xfsdump-3.1.9+0' touch built == dpkg-buildpackage: binary-arch test -f debian/rules rm -rf debian/xfsdump DIST_ROOT=`pwd`/debian/xfsdump; export DIST_ROOT; /usr/bin/make -C . install make[1]: Entering directory '/build/xfsdump-3.1.9+0' Building include Building librmt Building common Building inventory Building invutil Building dump Building restore Building m4 Building man Building man8 Building doc Building po Building debian gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/include' gmake[2]: Nothing to be done for 'install'. gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/include' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/librmt' gmake[2]: Nothing to be done for 'install'. gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/librmt' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/common' gmake[2]: Nothing to be done for 'install'. gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/common' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/inventory' gmake[2]: Nothing to be done for 'install'. gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/inventory' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/invutil' ../install-sh -o root -g root -m 755 -d /usr/sbin /bin/bash ../libtool --quiet --mode=install ../install-sh -o root -g root -m 755 xfsinvutil /usr/sbin gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/invutil' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/dump' ../install-sh -o root -g root -m 755 -d /sbin /bin/bash ../libtool --quiet --mode=install ../install-sh -o root -g root -m 755 xfsdump /sbin ../install-sh -o root -g root -m 755 -d /usr/sbin gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/dump' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/restore' ../install-sh -o root -g root -m 755 -d /sbin /bin/bash ../libtool --quiet --mode=install ../install-sh -o root -g root -m 755 xfsrestore /sbin ../install-sh -o root -g root -m 755 -d /usr/sbin # skip symlink when /sbin is alread symlinked to /usr/sbin, like on Fedora gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/restore' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/m4' gmake[2]: Nothing to be done for 'install'. gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/m4' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/man' /usr/bin/gmake -C man8 install gmake[3]: Entering directory '/build/xfsdump-3.1.9+0/man/man8' ../../install-sh -o root -g root -m 755 -d /usr/share/man/man8 ../../install-sh -o root -g root -m 644 xfsdump.8 /usr/share/man/man8/xfsdump.8 ../../install-sh -o root -g root -m 644 xfsinvutil.8 /usr/share/man/man8/xfsinvutil.8 ../../install-sh -o root -g root -m 644 xfsrestore.8 /usr/share/man/man8/xfsrestore.8 gmake[3]: Leaving directory '/build/xfsdump-3.1.9+0/man/man8' gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/man' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/doc' ../install-sh -o root -g root -m 755 -d /usr/share/doc/xfsdump ../install-sh -o root -g root -m 644 CHANGES.gz README.xfsdump /usr/share/doc/xfsdump ../install-sh -o root -g root -S CHANGES.gz /usr/share/doc/xfsdump/changelog.gz gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/doc' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/po' gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/po' gmake[2]: Entering directory '/build/xfsdump-3.1.9+0/debian' ../install-sh -o root -g root -m 755 -d /usr/share/doc/xfsdump ../install-sh -o root -g root -m 644 changelog /usr/share/doc/xfsdump/changelog.Debian gmake[2]: Leaving directory '/build/xfsdump-3.1.9+0/debian' ./install-sh -o root -g root -m 755 -d /usr/share/doc/xfsdump ./install-sh -o root -g root -m 644 README /usr/share/doc/xfsdump make[1]: Leaving directory '/build/xfsdump-3.1.9+0' DIST_ROOT=`pwd`/debian/xfsdump; export DIST_ROOT; /usr/bin/make dist make[1]: Entering directory '/build/xfsdump-3.1.9+0' Building include Building librmt Building common Building inventory Building invutil Building dump Building restore Building m4 Building man Building man8 Building doc Building po Building debian Building include Building librmt Building common Building inventory Building invutil Building dump Building restore Building m4 Building man Building man8 Building doc Building po Building debian echo Wrote: xfsdump-3.1.9.tar.gz Wrote: xfsdump-3.1.9.tar.gz make[1]: Leaving directory '/build/xfsdump-3.1.9+0' dh_installdocs dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 5 in use) install -d debian/.debhelper/generated/xfsdump install -p -m0644 debian/copyright debian/xfsdump/usr/share/doc/xfsdump/copyright dh_installchangelogs install -p -m0644 debian/changelog debian/xfsdump/usr/share/doc/xfsdump/changelog dh_strip dh_strip: warning: Compatibility levels before 10 are deprecated (level 5 in use) install -d debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/33 objcopy --only-keep-debug --compress-debug-sections debian/xfsdump/sbin/xfsrestore debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/33/690b8bb8673731e96d1ed0ddea752395930652.debug chmod 0644 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/33/690b8bb8673731e96d1ed0ddea752395930652.debug chown 0:0 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/33/690b8bb8673731e96d1ed0ddea752395930652.debug strip --remove-section=.comment --remove-section=.note debian/xfsdump/sbin/xfsrestore objcopy --add-gnu-debuglink debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/33/690b8bb8673731e96d1ed0ddea752395930652.debug debian/xfsdump/sbin/xfsrestore install -d debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/bc objcopy --only-keep-debug --compress-debug-sections debian/xfsdump/sbin/xfsdump debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/bc/5fca6bceb262b4c8ba23494b8464fe9f0bf094.debug chmod 0644 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/bc/5fca6bceb262b4c8ba23494b8464fe9f0bf094.debug chown 0:0 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/bc/5fca6bceb262b4c8ba23494b8464fe9f0bf094.debug strip --remove-section=.comment --remove-section=.note debian/xfsdump/sbin/xfsdump objcopy --add-gnu-debuglink debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/bc/5fca6bceb262b4c8ba23494b8464fe9f0bf094.debug debian/xfsdump/sbin/xfsdump install -d debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/b5 objcopy --only-keep-debug --compress-debug-sections debian/xfsdump/usr/sbin/xfsinvutil debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/b5/f103475d792ed0847c0ec5213a1463723b5e8a.debug chmod 0644 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/b5/f103475d792ed0847c0ec5213a1463723b5e8a.debug chown 0:0 -- debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/b5/f103475d792ed0847c0ec5213a1463723b5e8a.debug strip --remove-section=.comment --remove-section=.note debian/xfsdump/usr/sbin/xfsinvutil objcopy --add-gnu-debuglink debian/.debhelper/xfsdump/dbgsym-root/usr/lib/debug/.build-id/b5/f103475d792ed0847c0ec5213a1463723b5e8a.debug debian/xfsdump/usr/sbin/xfsinvutil install -d debian/.debhelper/xfsdump/dbgsym-root/usr/share/doc ln -s xfsdump debian/.debhelper/xfsdump/dbgsym-root/usr/share/doc/xfsdump-dbgsym dh_compress dh_compress: warning: Compatibility levels before 10 are deprecated (level 5 in use) cd debian/xfsdump chmod a-x usr/share/doc/xfsdump/README.xfsdump usr/share/doc/xfsdump/changelog usr/share/doc/xfsdump/changelog.Debian usr/share/man/man8/xfsdump.8 usr/share/man/man8/xfsinvutil.8 usr/share/man/man8/xfsrestore.8 gzip -9nf usr/share/doc/xfsdump/README.xfsdump usr/share/doc/xfsdump/changelog usr/share/doc/xfsdump/changelog.Debian usr/share/man/man8/xfsdump.8 usr/share/man/man8/xfsinvutil.8 usr/share/man/man8/xfsrestore.8 cd '/build/xfsdump-3.1.9+0' dh_fixperms find debian/xfsdump -true -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0 find debian/xfsdump ! -type l -a -true -a -true -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s find debian/xfsdump/usr/share/doc -type f -a -true -a ! -regex 'debian/xfsdump/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644 find debian/xfsdump/usr/share/doc -type d -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0755 find debian/xfsdump/usr/share/man -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/xfsdump -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.scss' -o -name '*.sass' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' -o -name '*.node' \) -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/xfsdump/usr/sbin debian/xfsdump/sbin -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod a+x dh_makeshlibs dh_makeshlibs: warning: Compatibility levels before 10 are deprecated (level 5 in use) rm -f debian/xfsdump/DEBIAN/shlibs dh_installdeb dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 5 in use) install -d debian/xfsdump/DEBIAN cp -f debian/xfsdump.postinst debian/xfsdump/DEBIAN/postinst [META] Replace #TOKEN#s in "debian/xfsdump/DEBIAN/postinst" chmod 0755 -- debian/xfsdump/DEBIAN/postinst chown 0:0 -- debian/xfsdump/DEBIAN/postinst cp -f debian/xfsdump.postrm debian/xfsdump/DEBIAN/postrm [META] Replace #TOKEN#s in "debian/xfsdump/DEBIAN/postrm" chmod 0755 -- debian/xfsdump/DEBIAN/postrm chown 0:0 -- debian/xfsdump/DEBIAN/postrm dh_shlibdeps dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 5 in use) dpkg-shlibdeps -Tdebian/xfsdump.substvars debian/xfsdump/sbin/xfsrestore debian/xfsdump/sbin/xfsdump debian/xfsdump/usr/sbin/xfsinvutil dh_gencontrol echo misc:Depends= >> debian/xfsdump.substvars echo misc:Pre-Depends= >> debian/xfsdump.substvars install -d debian/.debhelper/xfsdump/dbgsym-root/DEBIAN dpkg-gencontrol -pxfsdump -ldebian/changelog -Tdebian/xfsdump.substvars -Pdebian/.debhelper/xfsdump/dbgsym-root -UPre-Depends -URecommends -USuggests -UEnhances -UProvides -UEssential -UConflicts -DPriority=optional -UHomepage -UImportant -UBuilt-Using -DAuto-Built-Package=debug-symbols -UProtected -DPackage=xfsdump-dbgsym "-DDepends=xfsdump (= \${binary:Version})" "-DDescription=debug symbols for xfsdump" "-DBuild-Ids=33690b8bb8673731e96d1ed0ddea752395930652 b5f103475d792ed0847c0ec5213a1463723b5e8a bc5fca6bceb262b4c8ba23494b8464fe9f0bf094" -DSection=debug -UMulti-Arch -UReplaces -UBreaks chmod 0644 -- debian/.debhelper/xfsdump/dbgsym-root/DEBIAN/control chown 0:0 -- debian/.debhelper/xfsdump/dbgsym-root/DEBIAN/control dpkg-gencontrol -pxfsdump -ldebian/changelog -Tdebian/xfsdump.substvars -Pdebian/xfsdump chmod 0644 -- debian/xfsdump/DEBIAN/control chown 0:0 -- debian/xfsdump/DEBIAN/control dh_md5sums cd debian/xfsdump >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/xfsdump/DEBIAN/md5sums chown 0:0 -- debian/xfsdump/DEBIAN/md5sums cd debian/.debhelper/xfsdump/dbgsym-root >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/.debhelper/xfsdump/dbgsym-root/DEBIAN/md5sums chown 0:0 -- debian/.debhelper/xfsdump/dbgsym-root/DEBIAN/md5sums dh_builddeb dpkg-deb --build debian/xfsdump .. dpkg-deb --build debian/.debhelper/xfsdump/dbgsym-root .. dpkg-deb: building package 'xfsdump-dbgsym' in '../xfsdump-dbgsym_3.1.9+0_armhf.deb'. dpkg-deb: building package 'xfsdump' in '../xfsdump_3.1.9+0_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../xfsdump_3.1.9+0_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/7877 and its subdirectories I: Current time: Tue Jul 27 14:02:10 -12 2021 I: pbuilder-time-stamp: 1627437730 Wed Jul 28 02:02:29 UTC 2021 I: 1st build successful. Starting 2nd build on remote node virt64b-armhf-rb.debian.net. Wed Jul 28 02:02:29 UTC 2021 I: Preparing to do remote build '2' on virt64b-armhf-rb.debian.net. Wed Jul 28 02:05:33 UTC 2021 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. Wed Jul 28 02:05:35 UTC 2021 I: xfsdump_3.1.9+0_armhf.changes: Format: 1.8 Date: Fri, 10 Jul 2020 19:48:32 -0500 Source: xfsdump Binary: xfsdump xfsdump-dbgsym Architecture: armhf Version: 3.1.9+0 Distribution: unstable Urgency: medium Maintainer: Nathan Scott Changed-By: Anibal Monsalve Salazar Description: xfsdump - Administrative utilities for the XFS filesystem Closes: 953537 Changes: xfsdump (3.1.9+0) unstable; urgency=medium . * In postinst, create as needed the xfsdump and xfsrestore symlinks to support systems with merged /usr/sbin and /sbin Patch by Goffredo Baroncelli Closes: #953537 Checksums-Sha1: fbac9340278f0b29a354c670c585906bfb1c6d2b 734920 xfsdump-dbgsym_3.1.9+0_armhf.deb b06c5a05c3852072a8859a0ebb17cceaa09d3d55 5531 xfsdump_3.1.9+0_armhf.buildinfo 7d05c8b2753d8b2b6bd4c45e3281cea3a27bc1c0 232476 xfsdump_3.1.9+0_armhf.deb Checksums-Sha256: eb6dfdcf246b4fa994115f0d53b23bd029e3f11bbbea21c4c185471c46097266 734920 xfsdump-dbgsym_3.1.9+0_armhf.deb ef91ab5d1e57d994fa0cea631ea3546d09e1c71a40f257c4fb60a22bad65b480 5531 xfsdump_3.1.9+0_armhf.buildinfo 9253b7ee49c4e781de12426b23cdb105e6a9ae5fd26a6eb74bfb0df9c4ad09d7 232476 xfsdump_3.1.9+0_armhf.deb Files: e2fc3b0908d022c08588e487bace9a6e 734920 debug optional xfsdump-dbgsym_3.1.9+0_armhf.deb 67506676237702ca5aa6e36a6c2c6d9d 5531 admin optional xfsdump_3.1.9+0_armhf.buildinfo 22433bec8c989e77949e263cb7f70d64 232476 admin optional xfsdump_3.1.9+0_armhf.deb Wed Jul 28 02:05:39 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/xfsdump_3.1.9+0.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/xfsdump_3.1.9+0.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/xfsdump_3.1.9+0.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/b1/xfsdump_3.1.9+0_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.KPEpx6vPc2/b2/xfsdump_3.1.9+0_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.298s) 0.298s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.030s) 0.030s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Wed Jul 28 02:05:44 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Wed Jul 28 02:05:44 UTC 2021 I: xfsdump from bullseye built successfully and reproducibly on armhf. Wed Jul 28 02:05:45 UTC 2021 I: Submitting .buildinfo files to external archives: Wed Jul 28 02:05:45 UTC 2021 I: Submitting 8.0K b1/xfsdump_3.1.9+0_armhf.buildinfo.asc Wed Jul 28 02:05:46 UTC 2021 I: Submitting 8.0K b2/xfsdump_3.1.9+0_armhf.buildinfo.asc Wed Jul 28 02:05:47 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Jul 28 02:05:47 UTC 2021 I: Done submitting .buildinfo files. Wed Jul 28 02:05:47 UTC 2021 I: Removing signed xfsdump_3.1.9+0_armhf.buildinfo.asc files: removed './b1/xfsdump_3.1.9+0_armhf.buildinfo.asc' removed './b2/xfsdump_3.1.9+0_armhf.buildinfo.asc'